Fortinet FortiGate-60M Quick Start Manual

01-520-250472-201810 Copyright© 2018 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law trademarks ...

• Technical Support • New product features • Protection from new threats Vous devez enregistrer le produit pour recevoir: • Support technique • Nouvelles fonctionnalitées du produit • Protection contre de nouvelles menaces La reistrazione ti permette di usufruire di: • Supporto Te ...

Port Guide LED Guide Mounting Guide ...

Terminal emulation with console cable A B C A B Installation Removal iOS FortiExplorer app configuration ...

1. Connect the Ethernet cable. 2. Configure the management computer to be on the same subnet as the internal interface as the FortiGate unit: IP address: 192.168.1.2 Netmask: 255.255.255.0 3. Visit 192.168.1.99 in your web browser. 4. Login using username “admin” and no password. 5. Configure your device and save your settings. ...

To Connect to the CLI 1. Connect the FortiGate unit console port to the management computer using the provided console cable. 2. Start a terminal emulation program on the management computer, select the appropriate COM port, and use the following settings: Baud rate: 9600 Data bits: 8 Parity: None St ...

FortiExplorer App 1. Download the FortiExplorer iOS App to your device from http://apple.co/2jVvQkZ. 2. Launch the FortiExplorer App. 3. Use your Apple to USB cable to connect to the FortiGate’s USB port. Tap on your FortiGate when it appears in the App. 4. Log in using username “admin” and no password. 5. Confi ...

transceivers. Do not install or remove SFP transceivers while fiber-optic cables are still attached. This can cause damage to the cables, cable connectors, and the optical interfaces. It may also prevent the transceive ...

2. Remove the cap from the SFP cage socket on the front panel of the unit. 3. Position the SFP transceiver in front of the cage socket opening and ensure that the transceiver is correctly oriented. When the transceiver is correctly oriented, the extraction lever will be level with the socket latch. Note: SFP cag ...