GEMAC CANtouch Operation & User’s Manual
Text of the manual
GEMAC - Gesellschaft für
Mikroelektronikanwendung Chemnitz mbH
Zwickauer Straße 227
09116 Chemnitz
Germany
Phone:
+49 371 3377 - 0
Fax:
+49 371 3377 - 272
E-Mail: [email protected]
Web:
www.gemac-chemnitz.de
GEMAC - Gesellschaft für
Mikroelektronikanwendung Chemnitz mbH
Zwickauer Straße 227
09116 Chemnitz
Germany
Phone:
+49 371 3377 - 0
Fax:
+49 371 3377 - 272
E-Mail: [email protected]
Web:
www.gemac-chemnitz.de
Version: 1.6
Date: 01/28/2016
User Manual
CANtouch®
Various changes and error correction
10/06/2014
1.2
Bit timing settings appended
11/06/2014
1.3
Measurement “Common-Mode Voltage” enhanced
05/13/2015
1.4
Protocol Monitor: Symbolic decoding , Enhanced measurement of the Disturbance-free voltage
range, Or
Table of Contents
Table of Contents
1 Introduction.................................................................................................................................................. 1
2 Start-up.......................................................................................................................................................
Table of Contents
13 Node Measurement.................................................................................................................................15
13.1 General............................................................................................................................................15
13.2 List of nodes..................
Thank you for purchasing CANtouch®. You have acquired a tool supporting you in the start-up, analysis,
monitoring and servicing/maintenance of your CAN bus system.
Thanks to its wide range of applications, its high data transfer rate and above all through its high tolerance
against interference in the field of plant automation,
2.1 Receiving inspection
Carefully unpack and check the device and completeness of the delivery immediately after receipt. If trans-
port damage is suspected, inform the delivery agent within 72 hours and keep the packaging for inspection.
The device must only be transported in its original or equivalent packaging.
2.2 Handling
Always h
3 Overview of the CANtouch®
3 Overview of the CANtouch®
3.1 Connections
3.1.1
Power supply / charging
Only the supplied power supply unit must be used for power supply and charging of the integrated battery
via the extra-low voltage socket. It possesses a wide-range input designed for connection to mains voltages
from 115 V to 230 V with 50/60 Hz. While th