Espressione EM-1020 Manual
Text of Espressione EM-1020 Manual
English . . . . . . . . . . . . . . . . . . p. 5
Français . . . . . . . . . . . . . . . . . p. 27
Español . . . . . . . . . . . . . . . . . p. 49
c
b
d
a
n
m
h1
h2
h4
h5
h3
j
l
f
g
h
i
e
k
n
p
s
q
o
r
d2d3
d1
t
EM-1020
www.espressioneusa.com
Stainless Steel Automatic Pump Espresso Machine with Thermo Block System
IMPORTANT WARNINGS......................................................................................................... p. 6
INFORMATION ON PREPARING AN ESPRESSO................................................................. p. 8
TECHNICAL FEATURES AND ACCESSORIES......................................................................
PRODUCT DESCRIPTION........................................................................................
When using an electrical appliance, basic safety instructions must always be observed to
reduce the risks of fire, electric shock and injury, in particular the following:
1.
Read the instructions for use in full before using for the first time.
2.
Do not touch hot surfaces. Use the handles or buttons.
3.
To protect from fires, electric shocks and injuries, do not immerse the power cord,
plugs or the machine in water or any other liquid.
Ensure that the mains voltage corresponds to that marked on the appliance’s name
plate.
To prevent excessive load on the electricity network, do not connect other high
consumption appliances on the same circuit.
Check that the power cord is in perfect condition before each use.
Never pull the power cord or the appliance itself to disconnect the appliance.
Never leave the appliance unsupervised when connected.
If the power cord should become damaged, it m
INFORMATION ON PREPARING AN ESPRESSO
To obtain an espresso which is rich in aromas and creamy, the quality of the water, the temperature, the
variety of coffee, the roasting process, the fineness of the ground coffee, the dosage and the extraction
pressure are all determining elements.
Water
Always use clean fresh water and change the water every day. Water with a low mineral content is
preferred.
Temperature
For the first coffee or if multiple espressos a
An unbeatable espresso:
- 19 bar high pressure pump
- Pre-wetting of the ground coffee
- Filters with pressurization chamber for increased crema
Impeccable water:
- Thermo block heating unit for an ideal constant temperature
Complete freedom of use:
- Compatible with ground coffee and all paper pods, both soft and compact
Ease of use:
- 2 doses of espresso that are easy to program
- Water tank that can be accessed from th
The letters refer to the product description on page 9.
a. Group head
The group head enables the locking of the filter holder.
b. Stainless steel body
The body of your espresso machine is stainless steel for better quality and longevity.
c. Stainless steel cup warming plate
Warms cups quickly and efficiently, maintaining the ideal temperature longer.
d. Rotating control button
The rotating button activates the EXPRESSO, HOT WATER or STEAM function
p. 1 cup espresso filter
The cup size is identified on the bottom of the filter by the marking
. This filter allows you to prepare 1
cup of espresso using ground coffee, a compact paper pod or a soft paper pod.
q. 2 cup espresso filter
The cup size is identified on the bottom of the filter by the marking
. This filter allows you to prepare
2 cups of espresso using ground coffee. It cannot be used with 2 pods at the same time.
r. Espresso dosing spoon
We
BEFORE FIRST USE
Open the machine and remove all the plastic bags, boxes and papers protecting the different parts.
Never leave the plastic bags in reach of children.
Also remove any self-adhesive labels that may be on the product cover or any other information leaflets.
Remove detachable parts and clean in warm soapy water. Do the same with the other accessories.
Wipe the appliance body and stainless steel tray cover using a soft wet cloth.
IMPORTANT
Any
Espressione EM-1020 If water does not flow through the nozzle, the TEMPERATURE light flashes quickly and the pump
stops (pump not started). Refer to the section “Safety and visual warnings” and follow Scenario 1.
Empty the container and place under the group head without using the filter holder.
When the TEMPERATURE light (h4) goes off, briefly turn the Espresso Pre-programmed 2 cup
button to the right and let the Start other cycles of rinsing process through es
Espressione EM-1020 Do not use the 2 cup filter with paper pods.
Since the shape of the paper pods can differ from one brand to another, take care to center the pod in
the filter and push gently so that the sides fit.
IMPORTANT
If necessary, fold the sides of the paper pod inside the filter to prevent it from overhanging. This
will ensure that coffee will not leak outside the filter holder and prevent any damage.
C. Espresso function
Preparing the machine
Check the
Espressione EM-1020 Cleaning the filter and filter holder
Empty the filter using a small spoon or carefully tapping it against a surface so that any waste can be
collected.
Remove the filter.
Important
The metal parts on the filter holder and filter are very hot.
Rinse the filter and filter holder under hot water and dry.
D. Pre-programmed settings
The stainless steel EM-1020 automatic espresso machine allows you to pre-program 2 volumes of
espresso coffee very simply.
IMPOR
2. HOT WATER FUNCTION
The production of hot water is ideal for preparing tea, infusions or pre-heating a container.
Check the water level in the tank. (fg.1) .
Make sure that the frothing nozzle is securely fitted to the adjustable spout.
Check that the rotating control button is set to PENDING (
) and that the TEMPERATURE
SELECTION button (h3) is at ESPRESSO/HOT WATER
.
Switch the machine on by turning the START/STOP (h5) button to the right to the (I) se
Espressione EM-1020 You will then hear an intermittent noise which is the pump jump starting. This is completely normal
and necessary for the steam production. A little steam may be released from the water tank. This
is completely normal.
IMPORTANT
To prevent blocking the flow of steam, the spout should not touch the bottom of the container.
As soon as the milk begins to move, slowly return the frothing nozzle back to the surface with a circular
motion. Plunge the s
Descaling of the ESPRESSO circuit
This operation is performed with the filter holder removed.
Empty the water tank completely.
Pour 500 ml of water into the tank with a packet of Espresso anti-scale agent available in stores or
250 ml of white vinegar mixed with 250 ml of water.
Place a large container under the Group head
Turn the machine on, check that the control button is set to PENDING (
) and that the
TEMPERATURE SELECTION button (h3) is at ESPRESSO/
Once you have let the equivalent of a tank of fresh water circulate through the 2 circuits you can
be sure that there is no anti-scale agent left in the tank nor any residue taste resulting from its use.
5. SAFETY AND VISUAL WARNINGS
The control buttons on the EM-1020 include a general safety device that prevents confirmation of any
operation if the correct temperature has not been reached:
- While the TEMPERATURE light (h4) flashes, none of the
7. CLEANING AND MAINTENANCE
To ensure that your Espressione Espresso Machine works for many years, we advise you to perform
regular maintenance.
Important
- Before any cleaning, disconnect the machine’s power cord and ensure that the
machine is cold.
- None of the machine’s parts can be put in the dishwasher.
Regular cleaning of filters and filter holder
After each use, clean the filter and the filter holder under warm water.
Regularly check that the
Clean the outside of the plastic tube of the nozzle with hot water.
If necessary, unblock the internal steam duct by inserting the needle supplied (t) into the nozzle hole and
running some hot water or steam through the plastic tube (See sections " Hot water function" page 15
or "Steam function" page 15).
Ensure that all parts are completely dry.
We also recommend that you use this needle to unblock the holes in the filters and the small hole at
the top of