Espressif ESP8266 Operation & User’s Manual

2. Assembly ...................................................................................................................... 5 A. ESP8266 Module .................................................................. ...

C. The JSON Streaming Parser Library................................................................... 42 D. Conclusion ........................................................................................................... 44 7. Coll ...

included guide helps you step-by-step to setup an internet connected weather station which shows current and forecasted weather information. The Uctronics ESP8266 WeatherStation Kit has the advantage that everything fits together, but you can of course also ...

There are many different modules available based on ESP8266s, they differ in a number of aspects such as the quantity of available GPIO pins or if they can be programmed easily without need of an additional Serial-to-USB converter. If you are a beginer I suggest you use a developer-friendly module like the NodeMCU V1.0 or the Wem ...

With the display, you also have many options: do you want the pixels to be white or blue, or do you even prefer a two-color display where the footer is in one color and the rest in another? What really matters is the driver chip and the protocol. The OLED library currently supports I2C and SPI for both the SSD1306 and the SH1106 chip. The fir ...

This DHT11 Temperature & Humidity Sensor features a temperature & humidity sensor complex with a calibrated digital signal output. By using the exclusive digital-signal- acquisition technique and temperature & humidity sensing technology, it ensures high reliability and excellent long-term stability. This sensor include ...

You will also need some wires to connect the display to the ESP8266. In case you want to connect the display directly to the NodeMCU you will need at least four female-to-female jumper wires, since both the display and the NodeMCU have male pin headers. The wires don’t need to be long, 7.87” (20cm) is usually enough. To program the ESP8 ...

In this chapter, we will prepare your development environment by installing all the tools necessary. Drivers are needed to communicate with the ESP8266, a tool called “Arduino IDE” will let us write code, and a sample project will prove that the components are working well together. ...

To program the NodeMCU V1.0, your development platform (PC, Mac, Linux) needs to detect the Serial-To-USB adapter soldered onto the ESP8266 module. This ESP8266 development module has built in a high-quality Labs CP2102 Single-Chip USB to UART Bridge with Micro- USB connector that baud rates up to 921600. You can dow ...