Louvolite R1723 Operating Instructions

this can be changed using . S E T T I N G T H E T I M E R 1 7 2 3 6 C H A N N E L 1 8 S E T T I N G S T I M E R R E M O T E C O N T R O L F O R U S E W I T H R 1 7 1 0 M O T O R 1st time or re-setting operating instructions 2. Press and hold Limit and until a time appears. 5. Press to confirm, display will automatically move to Minute Time setting. 4. To set hour time press either Up or Down to navigate to correct hour time. 3. Press until hour flashes. 6. To set Minute Time use either Up or Down to navigate to the correct minute time. 8. Use either Up or Down to navigate to the Day of setting. 7. Press to confirm, display will automatically move to Day setting. 9. Press to confirm. 10. Press & hold until display flashes, release . Time and Day is set. BATTERY SPECIFICATION: Li-ion battery, 2000mAH, 7.4V. MOTOR TORQUE/SPEED: 1.1Nm/25rpm Setting button (Red) Charge port Antenna Remote Transmitter Confirm Limit LCD Screen Up Stop Down Channel - Channel +

this can be changed using . PA R I N G T H E H A N D S E T A N D M O T O R 2. Press until desired channel is selected (1 - 6). 3. Press and hold the Red button on the motor until it Jogs Twice(up once/down once). 4. Press Confirm on the handset until the motor jogs twice (up once/down once). 5. To check blind/motor press either Up or Down to confirm correct direction of motor. NOTE: If the blind is travelling in opposite direction press and hold Limit and Stop simultaneously until the motor jogs twice. S E T T I N G T H E B L I N D L I M I T 1. Ensure remote is in Manual mode, this can be changed using . 2. Press until desired channel is selected (1 - 6). 3. Press and hold Limit until motor jogs four times (up once/down once/up once/down once). 4. Press Up , the blind should move upwards. 5. Press Stop when the blind is close to top limit position. 6. To position exactly press either Up or Down until satisfied with top limit position of Blind. 7. Press Confirm. The motor will jog twice (up once/down once), the top limit position is now set. 8. Press Down . The blind should move downwards. 9. Press Stop when the blind is close to the bottom limit position.

can be changed using . 10. To position exactly press either Up or Down until satisfied with bottom limit position of blind. 11. Press Confirm. The motor will jog twice (up once/down once), bottom limit position is now set. 12. Both top and bottom limit positions of the blind have been set, to operate using the handset ensure this is in Manual mode. S E T T I N G T H E B L I N D S L I M I T S mid position setting 2. Move blind to the desired Mid-Position. 5. Repeat ‘Setting the Blind Limits’ for more blinds. 3. Press Limit and Up simultaniously until the motor jogs twice (up once/down once). 4. To operate the mid position press and hold Stop until the blind moves. We recommend making a note of desired programming channels, day, hour and minute times before proceeding (see table at end of Instructions). 1. Ensure remote is in Auto mode, this can be changed using . P R O G R A M M I N G A B L I N D 2. Press Limit and simultaneously until display flashes, the number 1 will appear. 3. Press and the blind channel number on the handset. Display will flash. 4. To move between blind channel numbers, use either Up or Down . 5. Press Stop to add a channel or use either Up or Down to navigate to required channel or to add additional blinds channels. 6. Press to confirm movement(s).

day settings. 8. Day will flash; Press either Up or Down to select day, press Stop to confirm selections. 9. Press . Hour Time on display will automatically flash. 10. To set hour time press either Up or Down to navigate to correct hour time. 11. Press Stop to confirm selection, Minute Time will automatically flash on display. 13. To select Blind Direction select either Up, Down or Mid Position, to navigate press either Up or Down then Press Stop to confirm selection. 12. To set Minute Time, press either Up or Down to navigate to correct minute time then press Stop to confirm. 15. Press and hold until Time on Display flashes, next “No (Number)” will appear. 14. If the display on the handset is no longer flashing, everything is set. If you have set all the blinds required then go to Step 16, to set further blinds repeat from step 3. 16. Note: You can press Confirm to exit the programming mode if the timing data is complete. Blind Channel Day Hour Minute Up/Down Mid Position Example: 1 Monday 8 00 Up Oct 2017