Emec KMS MF Operating Manual
Text of Emec KMS MF Operating Manual
SOLENOID DRIVEN METERING PUMPS
WITH DIAPHRAGM
EN
KMS MF - KMSA MF - KMS AC MF
OPERATING MANUAL
KMS MF
KMSA MF
KMS AC MF
Progettato da
Controllato da
Modificato da
Data
Edizione
Foglio
/
A4emec
Massimo_F
26/05/2011
00
Toll. Gen.
0.05
Materiale:
1 1
PVC GRIGIO
PRODUCT LABEL
This operating instructions contains safety information that if ignored can endanger life or result
in serious injury.
Read these instructions carefully before use and keep them for future reference.
Information and specifications on this manual could be uncorrect or could have printing errors.
Specifications are subject to change without notice.
Version: R1
PURPOSE OF USE
AND SAFETY
METERING PUMP IS INTENDED FOR CHEMICAL DOSING AND DRINKING WATER
TREATMENT.
Do not use in explosive area (EX).
Do not use with flammable chemicals.
Do not use with radioactive chemicals.
Use after a proper installation.
Use the pump in accordance with the data and specifications printed on the label.
Do not modify or use in a manner
Always keep the pump area clean to avoid and/or discover emissions.
Recycling guidelines
EWC code: 16 02 14
Always recycle according to these guidelines:
1. If the unit or parts are accepted by an authorized recycling company, then follow local recycling
laws and regulations.
2. If the unit or parts are not accepted by an authorized recycling compa
A not suitable transportation or storage can cause damages.
Use origianal box to pack the pump.
Observe storage conditions also for transportation.
Although packed, always protect the unit against humidity and the action of
chemicals.
Before return the dosing pump to the manufacturer Repair service, drain the chemical
from pump hea
1.1 KMS MF Series
KMS MF is designed for low/middle dosing of chemicals.
The pump has different working modes: Constant, Divide, Multiply, ppm, perc, mlq, batch, volt, mA.
KMS MF has got:
- STAND-BY input
- SEFL (flow sensor) input
- LEVEL input
- ALARM contact output.
Flow rate is determined by the stroke length and by the stroke speed. Th