Amprobe AM-560 Operation & User’s Manual

AM-560 Advanced HVAC Multimeter AM-570 Industrial Multimeter User Manual EN FR ES www. .com [email protected] 1.800.561.8187 ...

AM-570 Industrial Multimeter User Manual 10/2017, Rev.4 ©2017 Amprobe Test Tools. All rights reserved. Printed in China. www. .com [email protected] 1.800.561.8187 ...

Your Amprobe product will be free from defects in material and workmanship for one year from the date of purchase unless local laws require otherwise. This warranty does not cover fuses, disposable batteries or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or ...

AM-570 Industrial Multimeter 1 Flash light 2 LCD Display 3 Push buttons (See making measurement for button functions) 4 AM-570: Low-impedance button AM-560: Backlight button 5 Rotary switch 6 SELECT button 7 Input terminal for voltage, diode, capacitance, resistance, continuity and temperature measurement 8 C ...

2 Direct current 3 Negative reading 4 Alternate current 5 True-rms value 6 Low battery indicator 7 Data hold 8 Diode test 9 Continuity test 10 Relative zero mode 11 Non-contact Voltage detection mode 12 Measurement units for Resistance 13 Measurement units for Frequency 14 Measurement units for Voltage 15 ...

AM-570 Industrial Multimeter CONTENTS SYMBOL .................................................................................................................2 SAFETY INFORMATION .........................................................................................2 UNPACKING AND INSPECTION ............................... ...

� Caution! Refer to the explanation in this manual B Alternating Current (AC) F Direct Current (DC) T The equipment is protected by double insulation or reinforced insulation J Earth ground Audible tone Battery � Complies with European directives Conforms to relevant Australian standards ) Canadian Standards A ...

socket-outlets in the fixed installation, and equipment for industrial use and some other equipment, for example, stationary motors with permanent connection to the fixed installation. X�WARNING: Read before using • To avoid possible electrical shock or personal injury, f ...

measures a complete range of electrical parameters and features. Key functions include: temperature, capacitance to check the motor startup capacitors, micro amps for flame sensor troubleshooting, and a low pass filter to take accurate measurements on variable frequency drives. ...

• Auto power off • Low battery warning • Velcro strap to hang a meter • Safety: CAT IV 600V, CAT III 1000V MAKING MEASUREMENT X� 1. Use the proper function and range for measurements. 2. To avoid possible electrical shock, personal injury or damages to the Meter, disconnect circuit power and discharge all high-vol ...