Mopar 82215863 Manual 

Text of Mopar 82215863 Manual 

Soft Folding Truck Bed Cover

K6862996 1 www.mopar.com Standard Bed Install August 20, 2018 82215863 - 5’ 7” truck bed 82215864 - 6’ 4” truck bed 1.0 COVER PLACEMENT Place the cover onto the truck bed rails and bulkhead. NOTE: Take care not to damage or deform the cover seals while installing the cover. 1.1 STANDARD BED INSTALL NOTE: When placing the cover onto the bulkhead, make sure the cover cab seal fully contacts and seals to the top of the bu

Mopar 82215863 2.0 COVER LATCHING at the

FRONT/CAB END. Swing the cab clamps (1) down from the stowed position and slide them toward the truck bed rail. Swing the clamps so the clamp jaw is under the truck bed rail. The clamp jaw must be in contact with the metal truck bed rail, Do Not secure to the plastic bed rail or bed cap. Do Not use a wrench or over-tighten. Hand tighten until the clamp jaw contacts the metal flange, then tighten an additional

3.0 COVER LATCHING at the

REAR/TAILGATE END. Close the tailgate and unfold the cover. Check that the cover is parallel and square with the truck bed and bed rails. If not parallel or square, open the cover and loosen the cab clamps to reposition the cover. Open the tailgate, swing the tail clamps (2) down from the stowed position and slide them toward the truck bed rail. Swing the clamps and pull down so the clamp jaw is under the tr

For driving with the cover open, both cab clamps must be

secured, and both straps must be latched. DRIVING WITH THE BED COVER When driving with the cover closed, both the pair of cab clamps and the pair of tail clamps must be secured. Never tow or carry a vehicle backward with a bed cover installed. K6862996 August 20, 2018

Never use silicon, petroleum, or citrus based products on the bed cover.

1. CARE AND MAINTENANCE 2. WARRANTY The vinyl cover can be hand washed with mild soap and water or cleaned in a car wash. Thoroughly rinse the cover to remove any soap residue. The cover can be treated with any vinyl protectant specifically made for tonneau covers. Do not place objects on or against the cover or framework. Do not tie cargo to the cover frame. Never allow children or

Mopar Automobile Accessories Owners Instructions: