HiB Qubic 50 Manual
Text of HiB Qubic 50 Manual
Thank you for purchasing this HiB product.
Please read through these instructions carefully and refer back to them during installation to ensure that
your product is fitted safely and that it retains its high quality finish.
Please retain this leaflet for future reference.
Before drilling, ensure there are no hidden cables or pipes in the wall. Ensure the domestic electrical
mains supply to which the cabinet is being connected is turned off.
Please Note Yo
Fixing Preparation (Fig A)
Fixing Brackets (Fig B)
Hanger Adjustment (Fig C)
Mounting Points
Location of internal
fxing hole (SINGLE DOOR)
REAR VIEW
Location of internal
fxing hole (DOUBLE DOOR)
Wall Hung Installation
Ensure the domestic electrical mains supply to
which the cabinet is being connected is turned
off.
1. Position the cabinet in a suitable location
(according to the zonal diagram
Door Adjustment (Fig D)
Move door(s) up/down
Move door away/towards
the cabinet
Move door(s) left/right
11. Once fully secure, close the internal panel(s)
using the screws removed at stage 6.
12. Insert metal shelf supports in desired
position. Put glass shelf into shelf supports
and tighten the plastic grub screw whilst
holding the metal support. This will securely
clamp the shelf into position.
13. Re-attach the door(s) ensuring the hinges
fu
This product is suitable for installation in zones: 2 & Outside Zones
All installations must comply with guidelines which are based on a zonal concept. The diagram above
illustrates this concept and must be followed to ensure the safe installation of electrical appliances in the
bathroom. These regulations apply to domestic installations only. Installations must be made in accordance
with the current IEE wiring regulations and relevant building regulation