ICD electronics ICDE RD01 Operation & User’s Manual
Text of the manual
ICDE RD01 User Manual
Contents
Introduction
Technical specifications
How does RD01 work?
Precautions
How to use RD01?
Power
How to carry out measures correctly?
Warranty
Precautions
Storage and transportation
Introduction
Purpose
Radiation dosimeter ICDE RD01 is designed for measuring the product radioactivity level, detecting objects
contaminated with radio
Radiation levels are shown in micro-Roentgens/hour (μR/h) or milli-Roentgens/hour (mR/hr) where 1000 μR/h = 1 mR/h
and 1000 mR/h = 1 R/h. The abbreviation mRtg is equivalent to mR.
There are many different units to measure radiating doses.
Roentgen - in use since 1928 to measure generated radiation or exposure dose.
Sievert - in use since 1979, where
If the MENU button is pushed for less than one second (when the unit is on), the unit will change
modes from power mode that shows current radiation to dose mode (yellow light will come on) that
shows the total radiation detected since the unit was turned on.
o
If the MENU button is pushed again, it will switch the unit back to power mode and the yellow li
Do not drop the unit.
Protect the unit from shock and other mechanical impacts that can damage it.
Do not use the unit in conditions of high humidity, under or in contact with water.
Do not leave the unit in intensive sun light or high temperatures.
Do not leave the unit for a long time near devices that generate strong magnetic fields and where