NexxTech 1519001 Manual 

remote and lift off the cover. 2. Install 2 AAA alkaline batteries (not in- cluded) into the battery compartment as indicated by the polarity symbols (+ and -) marked inside. 3. Replace the cover. When the remote’s range decreases or it does not operate properly, replace the batteries. You have 2 minutes to change the batteries without losing codes you have programmed. However, do not press any buttons until batteries are installed. If buttons are pressed without batter- ies in the remote, all codes will be lost. Battery Saver Your remote automatically times out if the buttons are pr ...

0-9 For channel number or numeric entries. Enter To enter channel numbers for some devices. Last Goes to last channel viewed. Rew, Play, FF, Pause, Stop, Rec VCR transport keys. TV/VCR and TV/DVD Combo units For TV/VCR and TV/DVD combo units, you will need to set up two different buttons to control both parts of the combo unit. (See “Direct Code Entry.”) For example, set up a code under the TV button to control the TV part of the combo unit AND a separate code for the VCR or DVD under any other button you choose. Button Functions Note: Some buttons on the remote might have functions that are labeled differently on the de ...

If your product does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps. 1. Manually turn on the device (TV, VCR, etc.) to be controlled. 2. Press and hold the P (Program) button until the red indicator stays on. Release the P button. 3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit. 4. Press the Channel Up button repeatedly (up to 300 times) until the device to be con- trolled changes channels. If you accidentally overshoot the desired code, press the Channel Down button ...

the red indicator stays lit. Release the P (Program) button. 2. Press and release the desired mode button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Press and release the P (Program) button. The indicator light blinks off. 4. To find the first digit for the code stored under the mode key you pressed in step 2, press each numeric key from 0-9 in turn. When the indicator blinks off, the number you pressed is the first digit for the code you are searching for. 5. Repeat step 4 to find the second and third digits. (Indicator goes off when third digit is found). Operation 1. Press the mo ...

ORBYX Electronics warrants that this product will be free from defects in materials and workmanship for a period of ninety (90) days from the date of purchase. Within this period, simply take the product and your proof of purchase to any ORBYX Electronics store or dealer and the product will be repaired without charge for parts and labour. ORBYX Electronics reserves the right to charge for transportation. Any product which has been subject to misuse or accidental damage is excluded from this warranty. This warranty is only applicable to a product purchased through ORBYX Electronics’ company owned stores and dealers an ...

Orbyx Electronics, LLC 501 South Cheryl Lane, Walnut, CA 91789. Imported in Canada for/Importé au Canada pour: Orbyx Electronics, Concord, Canada, L4K 4M3. Cat. No. 1519001 Universal Remote ...