Lund 89111 Installation Instructions

Installation Instructions Framed Perimeter Grille Important Safety Information CAUTION PRECAUCIÓN ATTENTION ! Illustrations may vary upon application Sometimes the billet products get bent in the shipping process. You may need to hand bend them to attain the desired shape. To avoid risk of personal injury or property damage: • Wear safety glasses and gloves while installing billet inserts. • Use caution when working with any power tools. • Check clearance on vehicle. • Make sure that the billet inserts are secured in place and clears all moving parts of the vehicle. • Routinely check security of hardware. • Do not use automatic “brush-style” car washes. Contents Tools Required Shipping Note Care and Cleaning Congratulations! Page 4 of 4 Flat Head Screwdriver Phillips Screwdriver Safety Glasses and Gloves I-sheet Rev. A1 For proper installation and best possible fit, please read all instructions BEFORE you begin. For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-328-5863. Lund International, Lund Accessories Division 775 Tipton Industrial Drive, Building 2, Suite F Lawrenceville, GA 30045 Phone 800-328-5863 • Fax 800-782-5448 • Visit us at lundinternational.com © 2005 Lund International, Inc. All rights reserved. Lund® and the Lund® logo are trademarks of Lund International, Inc. You have purchased one of many quality Lund® branded products offered by Lund International, Inc. We take the utmost pride in our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of installation. To keep your billet grille looking their best, we recommend using only mild soap and water and a soft cotton cloth to wash and dry it. Use of rough cleaning agents or cloths may scratch or dull your billet grille. Should your billet grille become scratched or dull, we recommend TRENZ® Metal Polish to bring back the mirror finish. There are three grades of TRENZ® Metal Polish (Coarse, Medium and Fine) that will help you keep your billet grille looking brand new. Select the TRENZ® Metal Polishes best for your needs: 1. Course (Red) Polish – For severe scratches and pitted problems. 2. Medium (Green) Polish – For light scratches and dulling problems. 3. Fine (White) Polish – To bring back the mirror finish. TRENZ® Metal Polish can be used on all metal products, including aluminum, stain- less steel, brass and copper. If you have additional questions or concerns on the maintenance of your Lund® billet grille, please call us at 800-328-5863. You may also use high quality commercially available polish recommended for aluminum accesso- ries. Part Number 89111 4 - 5mm Lock washers 4 - 1/4 x 1-1/2” (W18) Washers 4 - Wing nuts D C B Billet Grille A

Page 2 of 4 Installation Steps 4 Illustrations may vary upon application 2 3 Insert the billet grille into the front of the grille shell. From behind the grille shell, use the washers and wing nuts provided to secure the billet grille. Push the grille shell back into place and replace the retainer clips and plastic rivets. Make sure everything is secure and close the hood. 1 Open the hood. Use a Philips screwdriver to unscrew the center of each plastic retainer clip. Use a flat head screwdriver to remove the plastic rivets that are located in the bumper opening. Pull the grille shell forward. (Grille shell will not be completely removed). A B C D