Mastech MS8301D Operation & User’s Manual

V Hz% Overview..........................................1 Safety Instructions............................2 Safe Working Habits..........................2 Electric Symbols...............................4 Meter Instructions.......................... ...

digital auto measuring range multi-meter with stable performance and novel structure. It can be used to measure AC/DC voltage, resistance, frequency, duty ratio, continuity and non-contact voltage tests. It is an ideal maintenance tool easily carried by a large number of users. To avoid electric shock ...

well as damage to the meter or measured objects, please use the meter according to the following procedures methods: Safety Instructions This digital multi-meter has been designed according to International Electro Safety Standard EN 61010-1, EN 61010-2-030, EN 61010-2-033 concerning safety requirem ...

V Hz% Measure known voltage with the meter to verify that the meter is working properly. If the meter is working abnormally, stop using it immediately. A protective device may be damaged. If there is any doubt, please have the meter inspected by a qualified techn ...

among measuring data, and the “MAX”symbol appears on the display, press the button again, the “MIN” symbol appears on the display and will show the minimum reading value among measuring data, press the button again to return to normal mode. (1)Direct voltage indicato ...

600V DC or AC, to prevent injury or damage to meterand equipment. Measuring Operation AC/DC Voltage Measurement: Rotate function selection switch to voltage measurement position. Press “FUNC” key to select AC or DC voltage Connect black and red test probe to COM input jack and respectively. Read the measured valu ...

measurement position, and turn off the power to the circuit to be tested Connect black and red test probe to COM input jack and respectively. Measure the circuit to be tested with other ends of test probes. If the measured circuit resistance is less than about 40Ω, the buzzer will ...

Maximum input voltage: 600V DC or AC (RMS) Measuring range: 1V~600V DC Max input voltage: up to 600V for no more than 60 seconds. DC Voltage Measuring range Resolution Accuracy ±(0.5% of reading+3 digits) 6V 60V 600V 0.01V 0.1V 1V AC Voltage Measuring range Resolution Accuracy ±(0.8% of reading+5 digits) 6V 60V 600V 0 ...