modway EEI–2807 Manual
Text of modway EEI–2807 Manual
Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 4
EEI–2807/2808 TABLE
Hardware:
Component:
A
Double-End Bolt x 4
Thank you for purchasing the MODWAY TABLE!
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size a
Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 4
EEI–2807/2808 TABLE
STEP 1:
STEP 2:
Secure 1 piece of Nut (B) into one end of Double-end Bolt (A) by hand as shown.
Repeat the same steps for the remaining Double-end Bolts (A).
Hardware & Tool required
B
A
2
Ax4
Bx4
Cx4
Dx4
Hardware & Tool required
Please put Table Top (2) upside down on a carpeted or padded a
Customer Service 908-368-1025︱www.modwayfurniture.com Page 3 of 4
EEI–2807/2808 TABLE
STEP 3:
STEP 4:
Put 4 pieces of Table Leg (3) to Table Top (2) through the assembled Double-End Bolt (A) as shown.
2
3
3
3
3
Bx4
Ex1
Cx4
Dx4
Secure 4 pieces of Nut (B), 4 piece of Spring Washer (C), and 4 pieces of Flat Washer (D) to the end of assembled
Double-End Bolt (A) as shown.
Use Wren
Customer Service 908-368-1025︱www.modwayfurniture.com Page 4 of 4
EEI–2807/2808 TABLE
STEP 5:
STEP 6:
Insert 4 pieces of Plastic Cover (F) into the assembled Table Leg (3) as shown.
Carefully turn over the assembled table.
Put Table Glass (1) to the Table Top (2) as shown.
Gx4
Hardware & Tool required
3
Assembly is complete. Your table is ready to be used now!
3
2
3
3
F
1
2
3