modway EEI-2803 Quick Start Manual
Text of modway EEI-2803 Quick Start Manual
Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 4
EEI–2803/2804 BAR TABLE
Hardware:
Component:
A
Double-End Bolt x 4
1
Thank you for purchasing the MODWAY BAR TABLE!
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to
Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 4
BAR TABLE
STEP 1:
STEP 2:
Please put Table Top (2) upside down on a carpeted or padded area.
Secure 4 pieces of Double-End Bolt (A) into the bottom of Table Top (2) as shown.
Put 4 pieces of Table Leg (3) to Table Top (2) through the assembled Double-End Bolt (A) as shown.
Ax4
Hardware & Tool required
2
A
A
A
A
2
Customer Service 908-368-1025︱www.modwayfurniture.com Page 3 of 4
BAR TABLE
STEP 3:
STEP 4:
Place Stretcher (4) to the assembled Table Top (2), and Table Legs (3) as shown.
Insert 8 pieces of Bolt (B) with 8 pieces of Flat Washer (C) into the holes on Table Leg (3) through the holes on Stretcher (4).
Use Allen Wrench (E) to tighten Bolts (B) clockwise until secure.
Secure 4 pie
Customer Service 908-368-1025︱www.modwayfurniture.com Page 4 of 4
BAR TABLE
STEP 5:
STEP 6:
Insert 4 pieces of Plastic Cover (G) into the assembled Table Leg (3) as shown.
Carefully turn over the assembled bar table.
Put Table Glass (1) to the Table Top (2) as shown.
Gx4
Hardware & Tool required
3
Assembly is complete. Your bar table is ready to be used now!
3
2
3
3
4
G
G
G
G
1