Measurement Computing CIO-DAS1401/12 Operation & User’s Manual

new and certified-used/pre-owned equipment • FAST SHIPPING AND DELIVERY • TENS OF THOUSANDS OF IN-STOCK ITEMS • EQUIPMENT DEMOS • HUNDREDS OF MANUFACTURERS SUPPORTED • LEASING/MONTHLY RENTALS • ITAR CERTIFIED SECURE ASSET SOLUTIONS SERVICE CENTER REPAIRS Experienced engineers and technicia ...

User’s Manual Revision 7 November, 2000 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com ...

the life of the product, to the original purchaser. Any products found to be defective will be repaired or replaced promptly. LIFETIME HARSH ENVIRONMENT WARRANTYTM Any Measurement Computing Corp. product which is d ...

23 9.2 CIO-DAS1402/16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 9.1 CIO-DAS1401/12 and CIO-DAS1402/12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 9 SPECIFICATIONS . . . . . . . . . ...

ii Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com ...

CIO-DAS1400 as a generic designation for the CIO-DAS1401/12, CIO-DAS1402/12 and CIO-DAS1402/16. When required due to the differences in the boards, the specific board name is used. The CIO-DAS1400 is easy to use. This man ...

DMA level 1 or 3 may be selected. The default level is level 1 (Figure 3-2). There are other boards that use DMA levels. Some network boards do and so do some IEEE-488 interface boards. Check to see if you have other boards in your computer that use DMA channels 1 or 3. Figure 3-2. DMA Level Select Switch 3.3 1/10 MHz XTAL JUMPER ...

The original Keithley MetraByte DAS-1600 was designed such that A/D conversion was initiated on the falling (trailing) edge of the convert signal from the internal pacer. Neither the original DAS-16, nor any of the other DAS-16 derivations convert on the falling edge. We are not aware of any A/D board that uses the falling edge to init ...

signals available are identical to the DAS-16, or optionally, an additional signal, SS&H OUT (Simultaneous Sample & Hold), is available at pin 26. The connector accepts female 37D type connectors, such as on ...