M Tops MS300HS Manual
Text of M Tops MS300HS Manual
About This Manual
This manual is designed to assist you in optimal usage of your new hot plate, stirrer or
hotplate stirrer.
Product Voltages
Hot plates, stirrers, and stirrer/hot plates are available in different voltages. Before initial use,
check that the unit you received is the correct voltage for your location.
Warranty
Misung Scientific Co., Ltd. warr
This instruction manual contains important operating and maintenance instructions which must be
Product Damage
read, understood, and followed by the product user. Failure to use this product according to this
▷ Keep the product dry and clean
instruction manual may degrade or defeat the protection normally provided by this product. Rea
Product Controls and Indicators:
Instructions for Use:
1) Turn temperature and speed to zero before plugging in. And connect the Main power cord to
Front side:
power supply. Place your container or heating bath with the magnetic stirrer bar. Stirrer bar
should be placed in center of hot plate
2) Place your container or heating bath with magnetic sti
▷ If liquid or wet solid material gets inside the product, immediately disconnect power to the
product and discontinue use. Contact Labnet for additional instructions regarding interior spills.
MS300HS,MS100(HP100)
1. Fill vessel with solution to be heated.
▷ Do not disassemble, modify, revise or repair this product. This
This equipment is marked with the crossed out wheeled bin symbol to indicate
that this equipment must not be disposed of with unsorted waste.
Instead it’s your responsibility to correctly dispose of your
equipment at lifecycle-end by handing it over to an authorized
facility for separate collection and recycling. It’s also