KROHNE SMARTMAC 200 W Handbook

for SMARTPAT PH/ORP/COND sensors Electronic Revision: ER 2.0.X_ SMARTMAC 200 W SMARTMAC 200 W SMARTMAC 200 W SMARTMAC 200 W Handbook Handbook Handbook Handbook © KROHNE 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en The documentation is only complete when used in combination with the relevant documentation for the sensor. ...

the prior written authorisation of KROHNE Messtechnik GmbH. Subject to change without notice. 2 www.krohne.com 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en Copyright 2017 by KROHNE Messtechnik GmbH - Ludwig-Krohne-Str. 5 - 47058 Duisburg (Germany) : IMPRINT ::::::::::::::::::::::::::::::::::::::: ...

SMARTMAC 200 W 1 Safety instructions 5 1.1 Software history ............................................................................................................... 5 1.2 Intended use ..................................................................................................................... 5 1.3 Certifications .................................................... ...

SMARTMAC 200 W 5.4.2 pH calibration........................................................................................................................ 37 5.5 Menu mode structure ORP............................................................................................. 39 5.5.1 Function table ORP measurement ............................................................... ...

5 SMARTMAC 200 W www.krohne.com 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en 1.1 Software history Changes and effect on compatibility 1.2 Intended use INFORMATION! In the table below, "x" is a placeholder for possible multi-digit alphanumeric combinations, depending on the available version. 1 Downwards compatible changes and fault repair with no effect on operation (e.g. spelling mistakes on display) 2-_ Downwards compatible har ...

6 SMARTMAC 200 W www.krohne.com 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en SMARTMAC 200 W is a loop-powered operating unit with display. The intended use of the SMARTMAC 200 W is to configure and calibrate the SMARTPAT PH, ORP or COND sensors in field. 1.3 Certifications The device meets the essential requirements of the EU directives. The CE marking indicates the conformity of the product with the union legislation applying to ...

7 SMARTMAC 200 W www.krohne.com 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en 1.4 Safety instructions from the manufacturer 1.4.1 Copyright and data protection The contents of this document have been created with great care. Nevertheless, we provide no guarantee that the contents are correct, complete or up-to-date. The contents and works in this document are subject to copyright. Contributions from third parties are identified as ...

8 SMARTMAC 200 W www.krohne.com 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en 1.4.3 Product liability and warranty The operator shall bear responsibility for the suitability of the device for the specific purpose. The manufacturer accepts no liability for the consequences of misuse by the operator. Improper installation or operation of the devices (systems) will cause the warranty to be void. The respective "Standard Terms and Cond ...

9 SMARTMAC 200 W www.krohne.com 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en 1.4.5 Warnings and symbols used Safety warnings are indicated by the following symbols. • HANDLING HANDLING HANDLING HANDLING This symbol designates all instructions for actions to be carried out by the operator in the specified sequence. i RESULT RESULT RESULT RESULT This symbol refers to all important consequences of the previous actions. 1.5 Safety ...

10 SMARTMAC 200 W www.krohne.com 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en 2.1 Scope of delivery INFORMATION! Inspect the packaging carefully for damages or signs of rough handling. Report damage to the carrier and to the local office of the manufacturer. INFORMATION! Do a check of the packing list to make sure that you have all the elements given in the order. INFORMATION! Look at the device nameplate to ensure that the device ...

11 SMARTMAC 200 W www.krohne.com 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en 2.2 Device description Figure 2-2: Device description (left - die-cast aluminium / right - stainless steel) 1 Display 2 Operation keys 3 Cable glands ...

12 SMARTMAC 200 W www.krohne.com 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en 2.3 Nameplate INFORMATION! Look at the device nameplate to ensure that the device is delivered according to your order. Check for the correct supply voltage printed on the nameplate. Figure 2-3: Example of a nameplate 1 Manufacturer 2 Device name 3 CE marking 4 TAG number 5 China RoHS, Data matrix code (serial number), Electronic / Electric device wa ...

www.krohne.com 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en 3.1 General notes on installation 3.2 Storage and transport DANGER! All work on the electrical connections may only be carried out with the power disconnected. DANGER! Observe the national regulations for electrical installations! WARNING! During installation of the device make sure that you use ESD (electrostatic discharge) protection equipment. WARNING! Obse ...

www.krohne.com 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en 3.3 Point-to-Point connection - analogue / digital mode Point-to-Point connection between the sensor and the HART® Master. The current output of the sensor is passive. Figure 3-1: Point- to-Point connection (only one primary and one secondary master can communicate with the slave simultaniously) 1 Primary master with e.g. PACTwareTM FDT/DTM 2 FSK modem 3 HA ...

www.krohne.com 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en 3.4 Pre-installation requirements For further information refer to Mounting plate die-cast aluminium on page 69. CAUTION! Always note the following items to ensure a proper and safe installation: • Make sure that there is adequate space to the sides. • Protect the device from direct sunlight. • The device installed in control cabinets require adequate coo ...

www.krohne.com 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en 3.5 Wall mounting The mounting plate is fixed at the back side of the device in the delivery condition. The following drawings illustrate the proper mounting: • Note the drawing above and mark all drill holes with the help of a pen, e.g. a felt pen 1. • Fasten the device securely to the wall with the help of drilling machine, plugs, screws and the mountin ...

www.krohne.com 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en Wall mounting of multiple devices (Die-cast aluminium) Figure 3-3: Dimensions and distances [mm] ["] a Ø6.5 Ø0.26 b 87.2 3.4 c 241 9.5 d 310 12.2 e 257 10.1 ...

www.krohne.com 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en Wall mounting of multiple devices (Stainless steel) Figure 3-4: Dimensions and distances [mm] [inch] a Ø6.5 Ø0.26 b 40 1.6 c 268 10.5 d 336 13.2 e 257 10.1 e ...

19 SMARTMAC 200 W www.krohne.com 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en 4.1 Safety instructions 4.2 Important device-specific notes on electrical connection DANGER! All work on the electrical connections may only be carried out with the power disconnected. Take note of the voltage data on the nameplate! DANGER! Observe the national regulations for electrical installations! WARNING! Observe without fail the local occupati ...

20 SMARTMAC 200 W www.krohne.com 09/2017 - 4003047503 - MA SMARTMAC 200 W R03 en 4.3 Opening and closing the converter housing 4.3.1 Die-cast aluminium housing • Loose the 4 screws 1 with a crosstip screwdriver. • Lift the housing at the top and bottom at the same time 2. • Slide the housing cover backward 3. i The housing cover is guided and held by the inside hinge; you have access to the terminal compartment now 4. Af ...