KIRTON Duo Mini User Information
Text of KIRTON Duo Mini User Information
2 Introduction to the Duo Mini chair
3
Duo Mini Chair
3
Guidelines for Best Practice
3 Questions and Concerns
4
The User Instructions
General Operation of the Duo:
4
What is Tilt-in-Space?
4
Operating the Tilt-in-Space and Elevating
Legrest
5
Back Height Adjustment
5 Back Support Adjustment
6
Footboard Height Adjustment
6
Footboard Angle Adjustment
6 Back Angle Adjustment
6
Seat Height Adjustment
7
Seat Length Adjust
Introduction to the Duo Mini
chair
What is the Duo Mini?
The purpose of the Duo Mini seating
system is to provide the ultimate in
positioning and postural management for
young children who are unable to maintain
their body posture and require extra
support.
The Duo is the third generation in Kirton’s
multi-positioning seating range following on
from the original Persona and Solo chairs.
Whilst the original chairs provided
significant manual adjust
Duo Mini Chair
Options
Different seat widths:
•
200, 250, 300 or 350mm
Available as either Ramped or Flat seat
modules
Pressure Relieving Seat Options
•
Intelli-Gel® Seat Module
•
Transflo Gel Seat Module
•
Reflexion™ Foam Seat Module
Back Style Options
•
Cushioned Waterfall Backrest
Accessories
•
Lateral supports
•
Leg-Laterals
•
Pommel
•
Extra waterfall cushion for back
heights over 490mm
•
Flat seat board
•
Ankle Huggers
•
Tr
The User Instructions
The purpose of the following user
instructions is to provide a guide on how to
utilise, adjust and maintain the Duo Mini
chair.
The instructions should be read by all those
involved with the supervision of the user
and/or the care of the chair before
configuration and use.
The Duo Mini must be set-up or configured
specifically for each individual using the
chair.
The necessary steps for configuration are
detailed in this docume
Back Height Adjustment
The correct postural position for the user is for
the top of the chair back to be the same height
as the top of the user’s ear.
To increase the back height of the chair:
• Detach the loose cover back panel at the
rear of the chair by unfastening the Velcro
both at the top and bottom of the cover.
• Secondly, loosen the material backboard
cover (it folds underneath the backboard for
storage on lower back heights) so that
Footboard Height Adjustment
It is important to try and support the whole
foot from the heel to the toes with the thighs
evenly distributed on the seat cushion to
ensure the least possible pressure directly
behind the knee.
• The complete footboard assembly slides
up and down the front tubes. It is easily
adjusted by using spring pull “snaps”.
When retracted and turned 90° the snaps
will stay out whilst the correct position is
selected.
• To
Seat Length Adjustment
To ensure that the correct seat length is
achieved for each user a clearance of 25mm
or one inch between the front of the seat
cushion and the calf is desirable when the
user is firmly against the back of the seat.
• To adjust, locate at the rear of the seat
module at the back of the chair frame a
silver-spring adjuster. Lifting the spring will
enable the seat module to be moved
forwards or backwards according to the
user�
The user’s elbow should rest comfortably
on the armrest, high enough to provide
support without having shoulders raised or
hunched.
• To adjust the arm height, remove the
side arm panel by pulling it away from the
chair. It is fitted with plastic clips for easy
removal and fitting.
• Loosen the front and back spring-loaded
levers. Rotate anti-clockwise until loose.
• Raise or lower the arm to the required
setting.
• Secure both the fr
Positional Headrest Adjustment
The top section of the headrest is designed
to adjust forward and backward to facilitate
precise positioning of the head to support
the user. It is adjusted in the following way:
• Remove the two grey clips that hold the
top section of the headrest in place.
• Slide the metalwork forwards until it
reaches the desired position.
• Replace the two grey clips, ensuring they
lock into corresponding holes in the
framework to
Lap-Belt and Pelvic Positioner
Lap-Belt
• To use the Lap-Belt effectively, undo the
buckle joining the two halves of the strap
by depressing the button on the central
console and place the straps over the
arms or to the side of the seat before
transferring the user into the chair.
• When the user is seated, bring the two
sides of the buckle together and fasten.
• Adjust the strap by pulling on the plastic
loop to give firm control but take care not
t