KIRTON Duo User Instructions

Text of KIRTON Duo User Instructions

2 Introduction to the Duo chairs

3 Duo Product Range 3 Questions and Concerns 3 Guidelines for Best Practice 4 The User Instructions General Operation of the Duo: 4 What is Tilt-in-Space? 4 Operating the Tilt-in-Space and Elevating Legrest 5 Back Height Adjustment 5 Back Support Adjustment 6 Footboard Height Adjustment 6 Back Angle Adjustment 6 Seat Height Adjustment 6 Negative Legre

Introduction to the Duo chairs

What is the Duo? The purpose of the Duo seating system is to provide the ultimate in positioning and postural management for those who are unable to maintain their body posture and require extra support. The Duo is the third generation in Kirton’s multi-positioning seating range following on from the original Persona and Solo chairs. Whilst the original chairs provided significant manual adjustment and positioning op

Duo Product Range

Range • Major and Minor versions Options Different seat widths: • Major - 400, 450 or 500 • Minor - 300, 350, 400 or 450 Available as either Ramped or Flat seat modules Pressure Relieving Seat Options • Intelli-Gel Seat Module • Transflo Gel Seat Module • Reflexion™ Foam Seat Module Back Style Options • Cushioned Waterfall Backrest • Sculpted Reflexion™ Foam Backrest Accessories • Lateral supports • Leg-Laterals �

The User Instructions

The purpose of the following user instructions is to provide a guide on how to utilise, adjust and maintain the Duo chair. The instructions should be read by all those involved with the supervision of the user and/or the care of the chair before configuration and use. The Duo must be set-up or configured specifically for each individual using the chair. The necessary steps for configuration are detailed in this document to ensu

Back Height Adjustment

The correct postural position for the user is for the top of the chair back to be the same height as the top of the user’s ear. To increase the back height of the chair: • Detach the loose cover back panel at the rear of the chair by unfastening the Velcro both at the top and bottom of the cover. • Secondly, loosen the material backboard cover (it folds underneath the backboard for storage on lower back heights) so that

Footboard Height Adjustment

It is important to try and support the whole foot from the heel to the toes with the thighs evenly distributed on the seat cushion to ensure the least possible pressure directly behind the knee. • The complete footboard assembly slides up and down the front tubes. It is easily adjusted by using spring pull “snaps”. When retracted and turned 90° the snaps will stay out whilst the correct position is selected. • To

KIRTON Indoor Furnishing Owners Instructions: