Kellfri 26-GAATV Manual 

Text of the manual

Read this manual carefully

before using the product! Translated from the original 26-GAATV BACKHOE DIGGER

Table of contents

2 Table of contents Introduction 3 Product information 3 For your safety 4 Incase of emergencies 4 Personal protection 4 Product safety information 5 Warning signs and labels 6 Surroundings 7 Assembly Instructions 8 - 11 Digging mode 12 - 13 Operating the machine 14 Before operating 15 Basic digging methods 16 After use 17 Maintenance and s

Table of contents

3 INTRODUCTION Thank you for choosing a product from Kellfri AB. By following the general safety information and the instruction manual and by using common sense, you will have a great and safety use of your Kellfri product for many years. Kellfri designs and delivers effective, affordable ma- chinery and components for forest, agriculture,

Table of contents

4 FOR YOUR SAFETY Before using the product, please read the safety information and instruction manual and un- derstand its contents for your own and others’ safety. Always keep the safety information and instruction manual easily accessible to the user of the product. Remember that it may be good for your own and others’ safety to read

Table of contents

5 PRODUCT SAFETY INFORMATION • Always read the instructions carefully before using the backhoe! • Never leave the equipment whilst the motor is running. Turn off the motor when you leave the equipment - even for a short while. • Always disconnect the equipment before performing service or maintenance work. • Only you who are operat

Table of contents

6 WARNING SIGNS AND LABELS Ensure that warning labels are always visible and clean. Clean the warning labels as required. Do not rinse using pressure washer directly on the warning labels. Any damage/ broken stickers should be replaced. Order new stickers from your supplier. SYMBOL EXPLANTION Read the operating manual! Before carrying out w

Table of contents

7 SURROUNDINGS Make sure your working area is clear from people, children and objects before installing and using the machine. Risk of serious injuries can occur during operation. Take an extra caution when children are in the area where the equipment/ product is being use or stored. Check the area for low hanging electrical wires. Be caref

Table of contents

8 ASSEMBLY INSTRUCTIONS Because of the weight of the machine, it is recommended that the unpacking and assembly are carried out by two people. The following instructions describes the assembly of the back- hoe. STEP 1: Assemble the Wheel Leg. a. Insert the wheel leg into the Backhoe Frame, insert the Safety pin (#42) then lock with R Pin (#

Table of contents

9 c. Attach the Long Arm to the Swivel Bracket Assembly by using Axis Pin(#86),Washer Ø38 (#114) and lock with Cotter Pin (#84). d. Put the Arm to the Backhoe Frame by using Long PinØ30x170 (#85),Flat Washer Ø24 (#115), and lock with Cotter Pin Ø4x50 (#55). Note: The Pin (#85) is a safety Pin. Remove it before using the machine and inse

More Kellfri Construction Equipment Owners Instructions: