HunterDouglas Sonnette PowerView Automation Installation Operation Care
Text of HunterDouglas Sonnette PowerView Automation Installation Operation Care
Installation • Operation • Care
Sonnette®
Cellular Roller Shades
PowerView
® Automation
all-guide
s.com
© 2020 Hunter Douglas. All rights reserved. All trademarks used herein are the property of Hunter Douglas or
their respective owners.
GETTING STARTED
Product View................................................................................................................. 1
Tools and Fasteners Needed........................................................................................ 2
INSTALLATION
Installation Overview ....................
Rechargeable Battery Wand, Satellite Battery Pack,
C-Size Satellite Battery Wand, 18V DC Power Supply,
and XL Installation Brackets
Thank you for purchasing Hunter Douglas Sonnette® Cellular Roller Shades with PowerView®
Automation. With proper installation, operation, and care, your new shades will provide years
of beauty and performance.
Please thoroughly review this instruction booklet and the enclosed packing list before
beginning the installation.
Tools and Fasteners Needed
■
1⁄4" Hex, Flat blade, and Phillips screwdrivers
■Level (laser level
STEP 1: Mount the Installation Brackets
■Your order will include the correct number of installation brackets for your shade width, as
shown in the table below.
NOTE: If your shade’s dimensions exceed 84" in width or length, XL brackets will be
included.
■Shade orders may also include spacer blocks or extension brackets, if they were specified
for added clearance.
Mounting Types and Window Terminology
If the installation brackets are
Mount the Installation Brackets — Inside Mount
Prepare the Installation Brackets
■Use pliers or heavy duty scissors to remove the top
tabs on the installation brackets.
NOTE: Save these tabs once removed. They may
be used as shims, if necessary.
Mount the Installation Brackets
■Mark 2" to 3" from each jamb for bracket location.
➤If more than two installation brackets came with your order, space additional bracket(s)
evenly between t
■Attach the installation brackets using the screws provided.
IMPORTANT: Do not overtighten the screws. Check to
ensure the bracket lever can be moved easily side to side. If
not, loosen the screws in one-eighth turn increments until
the lever can be moved easily.
IMPORTANT: The front edges of the installation brackets
must be level and aligned to each other.
NOTE: For usage of spacer blocks, see page 6.
Proceed to “STEP 2: Attach th