Htek UC923 Configuration Manual

BRM UADs Appliances EOL From Bicom Systems Wiki Contents 1 Introduction I 2 Video Tutorial I 3 Requirements I 3.1 Identifying phone model I 3.2 Phone firmware I 3.3 DHCP server I 3.4 PBXware version I 4 Installation I 4.1 Power adapter I 4.2 Power over Ethernet (PoE) I 4.3 Find the phone IP address I 4.4 Reset to factory settings I 5 Registering phone I 5.1 Manual configuration I 5.2 Auto Pr ...

UC923 to work with PBXware 4.1. Video Tutorial Video tutorial explaining Auto Provisioning setup for HTek Phone on PBXware 4. Video tutorial explaining Auto Provisioning setup for Htek Phone on PBXware 5. Requirements Identifying phone model To start and successfully complete registration of your Htek phone you need to know which phone model you will setup. From t ...

I To find out the firmware version of your Htek phone model open a new browser window and I enter your phone IP address in order to access the phone web administration interface login screen. Example: http://192.168.1.22. Login to phone web administration interface with your username and password. Please note, I factory default login details are username: admi ...

Connect the Network (only) Using a regular ethernet cable, your phone can be powered from a Power over Ethernet (PoE) compliant router or switch. Connect the Ethernet cable between the Internet port on the phone and an available port on I the in-line power router or switch. NOTE: If you are using Power over Ethernet (PoE), you don't need to connect the AC adapter. Make sure the Ethernet cable and router or switch is Power over Et ...

phone. The following topics are covered: UAD settings I Creating extension I Registering phone I UAD Settings UAD settings Login to PBXware web administration interface Open a new browser window and enter the IP address in order to access the PBXware web I administration login screen. Example: http://192.168.1.10. Login to PBXware with your e-mail ...

I Select Location: Local or Remote. I Local is for all extensions registered on the LAN and Remote is for all extensions registered from remote networks, WAN, Internet etc. Click on the Next step button. I Extension values Enter values into the required field text boxes. REQUIRED FIELDS: Name I Enter a name for the extension being created. Example: John Smith. E-mail I Enter the e-mail address associated wit ...

Primary SIP Server I - Example for Hostname: voip.bicomsystems.com - Example for IP Address: 192.168.1.10 SIP User ID I PBXware extension number. Example: 1003. Authenticate ID I Usually the same number as the SIP User ID. Authenticate Password I The Secret of the extension as received in the e-mail associated with this extension. Example: _%Z4M3*Ts9y7. A password is generated automatically for each ...

Open a new browser window and enter the IP address in order to access the PBXware web I administration login screen. Example: http://192.168.1.10. Login to PBXware with your e-mail address and password. I UAD settings. Navigate to Settings:UAD. I Make sure Htek UAD is enabled. To check the UAD status click on the edit icon corresponding I to your Htek phone. Make sure Status is set to Active, Auto ...

E-mail I Enter the e-mail address associated with this extension. This e-mail address will receive all system notification messages. Example: [email protected] Auto Provisioning I Set to Yes. MAC Address I Enter Htek phone MAC address. Example: 001FC1123456. MAC address can be found at the back of the phone. Click on the Save button. I Registering Phone Thi ...

Click on Management tab. I Click on Auto Provision link in the left hand navigation menu. I Choose what server type you intend to use: HTTP or Trivial FTP. NOTE: Our I recommendation is to use the HTTP. If you choose to use server type HTTP enter Hostname or IP Address, followed then by /prov. Example for Hostname: abc.bicomsystems.com/prov Example for IP Address: 192.168.1.10/prov Enter Auto Provisioning us ...

I You'll have to wait couple of seconds for the configuration to be updated. NOTE: Do not power I off your phone. Auto provisioning process will start during phone reboot process, phone will pickup I appropriate configuration file from PBXware. If everything is done as above described, you should have successfully registered your phone to PBXware. Dial *123 to verify registration. Configure BLF This chapter describes how ...

I web administration interface login screen. Example: http://192.168.1.22. Login to phone web administration interface with your username and password. Please note, I factory default login details are username: admin and password: admin. Click on Function Keys. I Configure 1 to 20 DSS Keys from the list. I Type: Select BLF. Value: Enter user extension. Example: 1005 Clic ...