Hook Wizard Preliminary Manual

constant improvement and development, HOOK Amplification reserves the right to alter specifications without prior notice. Important Safety Instructions . WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVIC ...

• Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, ...

Channel Switch between channel 1 and 2 by pressing the channel button Eq / voicing Channel 1: • Deep = deep • Eq light off = british class A tone stack • Eq light on = black ...

• 1-16A. Midi program change command 1-16 • 1-16B Midi program change command 17-32 Reverb Press reverb button, dial in your reverb level , press rotary encoder short to save for the current preset. Press reverb again to exit. Cab Press Cab button to go into cab menu. Select 1 of the 16 cabs. Press e ...

Midi in Connect a standard 5 pin din plug, other side to Midi foot controller or other midi device capable of sending midi program changes. Presence Dial in your favorite setting to match your cab. Power and Standby Switch the Wizard “on” and wait 45 seconds to he ...

No rights can be claimed by using this function. We made it as stable as possible, but with very extreme settings it is possible that the unit crashes. So, for the lovers of sorcery: It is possible to morph between every corresponding A and B memory location. For instance, preset 1A and 1B. Make to settings with the same channel and voi ...

Connect the USB cable after you turned the amp “ON” If USB is connected to the wizard and the editor is running, the cab knob is not functional. Editor The amp must be “ON” before connecting the USB cable to your Wizard amp. Otherwise you get in firmware update mode. • ...

and you could use another device like your DAW to use a plugin (that does a simulation) Impulse Response Speaker Simulator specs • Latency: 1.2 msec Impulse length: 200 msec • Impulse count: 16 • Sample freq 44,1kHz • Bit depth: 32Bit • Dynamic range ...