Hammer HNC 47.82 Manual 

manual carefully before using the machine! Translation of the original operating instructions 2019-12-18 Version 1.0 HNC 47.82 CNC portal machine HNC_01, 1, en_GB ...

6060 Hall in Tirol +43 (0) 5223 / 5850 [email protected] www.felder-group.com ...

Table of contents 1 Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1 Symbol legend. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.2 Contents of the operating manual. . . . . . . . . . . . . . . . . . . . . . . . . 5 1.3 Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.4 Liability and warr ...

7 Setup and installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 7.1 Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 7.2 Remove transport locking devices. . . . . . . . . . . . . . . . . . . . . . . . 22 7.3 Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 7.4 Electrical connection. . . . . . . . . . . . . . . . ...

1 Instructions 1.1 Symbol legend Safety instructions in this manual are indicated with symbols. The safety instruc- tions are introduced by key words which state in words the extent of the hazard. Comply with safety instructions under all circumstances, and act with care in order to avoid accidents, personal injury, or material damage. DANGER … indicates a situation of immediate danger ...

people who are to woik on or with the machine. All descriptions, texts, drawings, photos and other depictions are protected by copyright and other commercial laws. Any unauthorised use is prohibited. This manual, in its entirety or parts thereof, may not be transferred to third parties or copied in any way or form, and its contents may not be used or ...

ance with prevailing technological regulations and therefore conforms to industry safety standards. However, hazards may arise should the machine be operated by untrained personnel, used improperly or employed for purposes other than those it was designed for. The chapter entitled “Safety” offers an overview of all the important safety consid ...

This manual must be kept in the immediate vicinity of the machine and be acces- sible at all times to all persons working on or with the machine. The machine may only be operated if it is in proper working order and in safe condition. The gen- eral condition of the machine must be checked and the machine must be inspected for visible defects each time before it is switched on. Do not leave the machine running ...

2.7.1 Prohibitions When working on or with the machine, the following must be strictly observed: Note Wear a hair net. If the operator has long hair, a hair net needs to be worn. It is prohibited to wear gloves whilst working with the machine. 2.7.2 Mandatory safety equipment When working on or with the machine, the following must always be worn by per- sonnel: Protective clothes: Sturdy, tight-fitting ...

the machine and ensure that it can not be accidentally switched on again. ● When carrying out any work on the electrical equipment, ensure that the voltage supply is completely isolated. ● Do not remove any safety devices or alter them to prevent them from func- tioning correctly. 2.9 Other risks Even if the safety measures are complied ...

work on the aggregate: ● Processing of workpieces in synchronised processing. (Where the feed direc- tion is the same as the tool rotation direction). ● Operating the machine without using the appropriate safety equipment. Ensure that all safety devices have been installed properly. ● Deliberate or irresponsible behaviour on the machine during operation. ● Service work carried out by untrained or unautho ...

Declaration of Conformity 3 Declaration of Conformity EG-Declaration of Conformity according to Machine Guidelines 2006/42/EG We hereby declare that the machine indicated below, which corresponds to the design and construction of the model we placed on the market, conforms with the health and safety requirements as stated by the EC guidelines (see table). The machine number of this machine will be printed on the cover sheet of ...

weight Packaging incl. machine: Dimensions and weight Traverse Y X Z Fig. 1: Machine axes Movement speed 4 Technology Data All technical information is for the standard equipment without spindle and extrac- tion hood. Data Value Total length 1111 mm Total width 762 mm Total height 682 mm Weight approx. 81 kg Data Value Total length 1150 mm Total width 800 mm Total height 861 mm Weight approx. 108 kg Data ...

portal & other dimensions Accuracy Electrical connections Data Value Clearance width 625 mm Clearance height 160 mm Table surface 1005 mm x 574 mm T grooves in the table 17.5mm x 7.5 mm for M8 Tool chucks (standard) Ø 43 mm Data Value technical resolution in 1/8 step mode 0.00375 mm Repeatability ±0.05 mm Reverse backlash ±0.1 mm Torsional stiffness (150N) X,Y,Z 0.1 mm X axis axial tolerance ±0.10 mm Y axis ax ...

conditions Dust extraction Reference point Data Value Operation/room temperature +10°C bis +40°C Relative max. humidity 60 % Warehouse temperature -10°C bis +50°C Data Value Diameter of the extraction connection 32 mm Air speed 20 m/s Volume flow (at 20 m/s) 60 m³/h Vacuum 20,000 Pa 1 2 3 4 Fig. 2: Reference point 1 Reference point 2 Machine zero point 3 X-axis 4 Y-axis The machine zero point is situa ...

Permanent hearing damage − Use well sharpened tools and correct rotation speeds. − Ear protection must always be worn; such protection however, cannot be considered a substitute for correctly sharpened tools. ...

1 Machine chassis 2 Workpiece support 3 Mains connection & main switch 4 Portal with machine head 5 Clamping of the router 6 Connections 5.2 Machine data plate TYPE: HNC 47.82 A-6060 HALL in Tirol, KR-Felder-Straße 1 Austria, Tel. +43 (0) 5223 58500 Fax +43 (0) 5223 56130, [email protected] www.hammer.at Nr.: 534-00x-xxx V:230.0 PH:1 Hz:50/60 A:10.0 KW:2.3 - CNC Portal ...

nected to the machine. See  ‘Connection emergency stop’ on page 26 ● The use of an extraction protection hood is compulsory when using rotating tools. ● Soldered tools and tools that have a diameter larger than 8 mm may only be used with protective housing. See  Chapter 8.3.1 ‘Protective housing’ on page 30 ...

6 Transport, packaging and storage 6.1 Safety instructions NOTICE Transport damage The machine can be damaged or destroyed if it is subjected to improper handling during transport. − Always move the machine with the utmost care and caution. − Avoid mechanical vibration. − Overseas transport: Machine must be tightly packed and pro- tected from corrosion. Use desiccant. WARNING Falling parts There is a risk ...

6.2 Transport Fig. 5: Packaging The machine is transported equipped with the transport locks. It is recommended to store the packaging and transport locks, once removed. If, due to any defects, the machine has to be returned to the manufacturer then the original packaging and transport locks should be used. 6.3 Transport inspection Upon arrival, inspect the shipment to ensure that it is complete and has not suf- fered an ...