Haas AD0263 Replacement

Text of Haas AD0263 Replacement

LAST UPDATED: 11/28/2018

Servo Amplifier - PCB Auxiliary (AUX) Load - Replacement AD0263 Applies to machines built from: January, 1996 Introduction 1. Servo Amplifier 2. Smart Servo Amplifier 3. Smart Servo Amplifier with AUX Load Do this procedure to install the AUX load [3] when you install a Smart Servo Amplifier [2]. The replacement amplifier must have the same amp rating as the servo amplifier [1] that you remove. You must install the AUX load [3] on

Caution: When you do maintenance or repair on CNC machines and their components, you must always follow

basic safety precautions. This decreases the risk of injury and mechanical damage. • Set the main circuit breaker to the [OFF] position. Danger: Before beginning any work inside the control cabinet the High Voltage indicator light on the 320V Power Supply / Vector Drive must have been off for at least 5 minutes. Some service pro

Haas Amplifier Owners Instructions: