FUTURE KIT FK1108 Manual 

of ground. It is a sensor-activated robot which will run according to the infrared volume received by the sensor. Technical Specifications: - Power supply : 2 AA batteries (not included). - Consumption : 150mA. - Infrared detecting speed : controllable. - PCB dimensions : 2.18 x 2.63 in. (1) ROBOT CONTROL CIRCUIT How To Work: The circuit is composed of 2 major parts, light detecting and light flashing, as shown in Fig. 1. The light detecting part is composed of 2 alike circuits that will work in the same manner. Each circuit will start working when the photo received infrared light from LED I ...

Assembling Steps of the Body set. http://www.futurekit.com HIGH QUALITY ELECTRONIC KIT SET FOR HOBBY & EDUCATION 1 2 Mini Caster Flat head nut 2.5x10 and NUT M2.5 Screw 2x1/4 Install battery holder to body robot with flat head nut 2.5x10 and nut M2.5. Take off the both screw of motor gear and then mount the motor lock. Secure with the both screw of motor gear. Install the wheels onto the shaft of the gear motors and secure them with the remaining two #4 x 1/4" pointy screws. Screw 4x1/4 Screw 4x1/4 Install the control board into body robot. Insert the electric wire battery holder into body robot. Solder electric wire at motor pole with ...