Flo CoRe+ Installation Manual

3 Cable Management System Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Wall mounted installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Cable management system installation . . . . ...

4 Cable Management System Guide This guide aims at describing how to install a Cable management system on a new charging station or on a device that has already been installed. The Cable management system is reliable, made from aluminum and convenient to use. It’s maintenance free and keeps c ...

5 www Wall mounted installation Specific Tools or Material Required • Wall attachment hardware material (¼ in diameter screw, washers and wall anchors as required) BEFORE GETTING STARTED ! When unpackaging the Cable management system, make sure to remove the security screw used to hold the ...

6 • Determine where the wall mount (column) will be placed. Allow 12 to 14 in between the column and the charging station. • Determine what wall attachment hardware is required (wall anchors, screws and washers) to securely install the mount brackets to the wall. Use ¼ in diameter screws a ...

7 Cable management system installation 1. First, install one of the two spacing shims and the lower wall mount bracket at the desired height by using two ¼ in diameter screws and appropriate washer. Make sure that both brackets are levelled horizontally. Remark : The lower wall mount bracket c ...

8 Single charging station installation Included material Qty Cable management system columns and cable clamp 1 Empty column 1 Column mount bracket 2 Round spacing shims 2 Rectangular spacing shims 2 Self-adhesive rubber band 1 ¼-20 screws (1’’) (for pre-drilled pedestal) 6 Self-drilling sc ...

9 BEFORE GETTING STARTED ! When unpackaging the Cable management system, make sure to remove the security screw used to hold the counterweight during transport. ¡ Installing on a new single charging station. First, install the pedestal and the charging station. Refer to CoRe+ MC Installation ...

10 Dual back-to-back charging station installation IF THE PEDESTAL IS NOT PRE-DRILLED, USE THE FOLLOWING DRILLING TEMPLATES: Top Drilling template MEC-CST-00280 Bottom Drilling template MEC-CST-00278 Included material Qty Cable management system columns and cable clamp 2 Top mounting brackets 2 ...