Fein BOP6 Instruction Manual

FEIN Service USA FEIN Power Tools Inc. 1030 Alcon Street Pittsburgh, PA 15220 Telephone: (412) 922-8886 Toll Free: 1-800-441-9878 www.feinus.com Canada FEIN Canadian Power Tool Company 323 Traders Boulevard East Mississaug ...

en 3 fr 17 es 32 OBJ_BUCH-0000000005-001.book Page 2 Friday, February 5, 2010 8:57 AM ...

Read all safety warnings and all instructions. Failure to fol- low the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. Do not use this power tool before you have thoroughly read and completely understood this Instruction Manual, including the ...

tion of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-related hazards. 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safe ...

When working with power tools, such as when grinding, sanding, polishing, sawing or for other work procedures where material is removed, dusts develop that are both hazardous to one’s health and can spontaneously combust or be explosive. Contact with or inhaling some dust types can trigger allergic reactions to the operator o ...

Extension cord. If the use of an extension cable is required, its length and con- ductor cross-section must be adequate for the applicational case, in order to prevent a volt- age drop in the extension cable, power loss and overheating of the power tool. Other- wise ...

hand-held machine for drilling in metal, wood, plastic and ceramics in weather-pro- tected environments using the application tools and accessories recommended by FEIN. – BOP 10/BOP 10-2: Also intended for thread cutting (tapping). Symbols. Symbol, character Explanation Do not touch the rotating parts of the power tool. ...

n rpm; /min Rated speed P W Unit of measure for electrical power ° Unit of measure for the angle width U V Unit of measure for the electric voltage f Hz Unit of measure for the frequency I A Unit of measure for the electric current intensity m lbs Unit of measure for the mass l ft, in Unit of measure for ...

Before mounting or replacing application tools or accessories, pull the power plug. This preventive safety measure rules out the danger of injuries through accidental starting of the power tool. The delivery scope of your power tool may include only a part of the accessories described or shown in this instructio ...

7 205 44 7 205 45 Power input 500 W 500 W 500 W Output 270 W 270 W 270 W No-load speed – 1. gear – 2. gear 0 – 4000 rpm – 0 – 1500 rpm – 0 – 700 rpm 0 – 2250 rpm Speed, full load – 1. gear – 2. gear 0 – 2700 rpm – 0 – 900 rpm – 0 – 460 rpm 0 – 1350 rpm Drilling diameter, stee ...