Icecrypt S3250CCIHD Manual
Text of Icecrypt S3250CCIHD Manual
1
CONTENTS
1.
SAFETY .............................................................................................................................................................3
2.
INTRODUCTION .............................................................................................................................................3
3.
FEATURES..............................................................................................................
12.1 INFORMATION ................................................................................................................................................. 26
12.2 DEFAULT SETTING .......................................................................................................................................... 26
12.2.1 Default Value: ..........................................................................................................
This HD Receiver has been manufactured to satisfy the international safety standards.
Please read the following safety precautions carefully.
MAINS SUPPLY: 100~240V AC, 50/60Hz
OVERLOADING: Do not overload wall outlet, extension cord or adapter as this may result in fire or
electric shock.
LIQUIDS: Keep liquids away from the HD Receiver. The apparatus shall not be exposed to dripping
or splashing and that no objects filled with liquids, such as
If you have any difficulties concerning the operation of your HD Receiver, please refer to the relevant
section of this manual, including the ‘Troubleshooting’. This Manual will provide you with useful
information on using the HD Receiver.
3. FEATURES
MPEG-Fully DVB-S/DVB-S2/DVB-T/DVB-T2/DVB-C/DVB-C2 (H.264) HD compliant
6000 channels (TV and Radio) programmable
Multilingual menu text support
Channel switching time less than 1 second
Icecrypt S3250CCIHD 4. Remote Control
You can power on/off the receiver, operate on screen menu, and
use a variety of hot key functions.
POWER
To switch your receiver on from standby.
MUTE
Used to enable or disable the audio
NUMERIC KEYS
Used to select channels or enter programming parameters
TV / RADIO
Receiver switches between TV and Radio mode.
(ZOOM)
Press
key select zoom times, from X1 to X16.
RECALL
Return to the previous menu or status.
TV/SAT
Receiver switches bet
Select the play mode in MP3 or JPEG player.
USB
To remove the USB Hard Disk safely.
TMS (Time Shift)
Press this button to display Time Shift info bar.
Play
To play the MP3, JPEG, or Record files.
Stop
To stop the Time Shift, recording, or MP3/JPEG player.
PAUSE
Used to select the freeze function.
Press once to freeze the screen picture.
FB
To start Fast Backward function.
FF
To start Fast Forward function.
SB
To start Slow Backward functi
Icecrypt S3250CCIHD 5. Front panel
POWER KEY: To switch the receiver power on/stand by.
MENU KEY:To enter the Main Menu.
◄ ► KEY: To adjust volume level, or to move cursor left or right in the menu.
▲▼ KEY: To change channels, or to move cursor up or down in the menu.
OK KEY: To see TV/Radio channel list, or to confirm in the menu.
Remote Sensor: Detects infrared signal from remote control unit.
POWER Indicator: Lit whilst the receiver is powered on and at standby
7. Connecting Your System
There are two ways to connect the receiver to your existing TV system. We recommend using one of
the following cases for the best result:
1. If you have a high definition television set, you should use a HDMI cable for best result, Plug one
end of the cable into the HDMI socket on the receiver, and the other end into the matching socket on
your television. In this case, you do not have to make audio connections because the HDMI
8. Basic Operations
8.1 Turn on STB
First, press the [Device’s Main Power] to turn on
the unit. When the STB is first used it will show
the Main Menu. If channels are already installed
the, STB will play the same channel as last time
before turning off.
Frequently Asked Questions
Q: The power of my STB has been turned on
and not in Standby mode, but the TV
screen showed nothing:
A: Make sure the TV set has been set to the
correct video input (not the
1 In full screen, press [FAV] key, it will display
a window of “Favourite list” on the left of the
screen, which you can see like below.
2 In the window of “Favourite list ", you can
move highlight by press [Channel
Up/Channel Down] key to select favourite
Channels.
3 In the window of ” Favourite list ", you can
press [Left/Right] key to select favourite
groups Pressing [P-/P+] keys can
implement the “Page up/Page down”
functio
2 Press [Red] key to select the channels by
different groups, such as by
Favourite/Satellite/Provider/CAS etc.
3 Press [Green] key to select different display
modes including “Now EPG”, “Next EPG”,
“More” and “Schedule”, like the below
image:
4 Press [Yellow] key in EPG menu to set one
record timer or go to Timer List menu.
5 In EPG menu, when you select one event
by highlighting item, you can set this event
to record directly by pressin
2 Press [Red] key to change the group.
Which you can see below.
3 Press [Green] key to display detailed
information for EPG Now.
Press [Yellow] key you to change the current
channel’s property, such as FAV/ Lock/ Skip/
Delete/ Rename.
4 Press [Blue] key to open the “Sort” window
like below. There are five kinds of ways to
sort. You can press [Channel Up/Channel
Down] key to move highlight and press
[OK] key to confirm your selection.
5 The five wa
8.16 Page Up/Page Down
In Channel list, press [Page+/Page-] key to page
up and page down in the channel list.
8.17 TEXT
1
Press [TTX] key in full screen, you can
open Teletext page on a channel which has
Teletext information.
2
If the channel has no Teletext information,
it will show “No Teletext Data” on the
screen.
8.18 Subtitle
Press [Subtitle] key in full screen to switch
subtitles “On” or “Off”.
8.19 Find
1 Press [Find] key in full
Press [EXIT] key to exit the current menu, to
return to last menu, or close the window.
9. Service
When you press [Menu] key to enter menu,
there will display the picture like below:
Press [Up/Down] key to select the
submenu of organizing services and
organizing favourites.
Press [OK] key to enter the “Organizing
Service”. If Menu Lock is “On”, it will display
a dialogue for user to key in password. The
default Password is “
Icecrypt S3250CCIHD Press [Green] key to open the “Options”
window like above.
2.
You can press [Up/Down] key to move
highlight and press [OK] key to confirm the
selection.
3.
Press [Menu] key to close “Options” List.
Move
1.
Select the channels which you want to edit
in channel list by pressing [OK] key.
2.
Then press [Right] key to move the high
light to right toolbar.
3.
Select Move icon by pressing [Channel
Up/Channel Down] key and [OK] key.
4.
Move the chan
Press [Find] key to open the “Find” window
like above. You can press [Channel
Up/Channel Down/Volume Up/Volume
Down] key to move highlight and press [OK]
key to input the selected symbol or letter
into the find box.
2.
After inputting each character, the
programme list on the left will search the
channel according your selection, and list
the matched channels.
3.
Move highlight to “OK” and press [OK] key
to close “Find” window and you can
2 Press [Up/ down] key to select satellite.
Press [Page] key to page up or page down.
LNB Type
In this option press[Volume Up/ Volume
Down]key to switch among “Standard”, “User”,
“Universal” and ”Unicable” mode.
DiSEqC
DiSEqC: You can use [Volume Up/ Volume
Down] key to switch options. There are
several options for your selection:
a) Disable: No DiSEqC.
b) 1/2, 2/2: two DiSEqC ports.
c) 1/4, 2/4, 3/4, 4/4: 4 DiSEqC ports.
d) 1/8, 2/8�
Icecrypt S3250CCIHD In “LNB POWER” option, you can press [Volume
Up/ Volume Down] key to switch:” Off、13v/18v、
13.5V/18.5V” functions.
TP Edit
When you enter “TP Edit” menu you will see a
screen like below:
1 In “Satellite” option press [Volume Up/
Volume Down] key to switch to the satellite
that you want to scan, or press [OK] key to
enter satellite list for selection.
2 In “TP Index” option, you can not only use
[Volume Up/ Volume Down]