IAdea XDS-1070 Quick Start Manual

For complete documentation, please visit www.digisignage.com Box Contents Port connections Front View Rear View Quick Start Guide Main Unit AC Adapter (with select power plug) Table Stand Power and micro SD card brackets all-guides com

Mounting Option 1: [VESA mount] Supporting VESA standard: VESA MIS-D75 (75*75mm) Supporting screw: M4*4mm (exclude the mounting plate thickness) Mounting Option 2: [Using back cover] (power / SD card brackets MUST NOT be installed while mount on back cover) Release the back cover screw to release back cover Install back cover : thread head height not to exceed 3mm Route power and network cable from bottom, connect to signboard before mounting signboard on back cover Insert power plug Fasten bracket onto the socket Insert SD Card bracket Fasten the SD Card bracket Landscape Simply screw the supplied table stand onto the stand screw hole. Support landscape/portrait setup. Portrait Securing power/network cable Installing the table stand Mounting options Securing SD Card

→ You should see the player boot up screen as shown in right. 2 WAIT while player boots up → Once you see “Basic settings” on screen, the unit is ready for content update or menu configuration. 3 PLUG IN a USB mouse to the unit’s USB port or configure by touch screen (XDS-1078 only). 4 Enter the corresponding configuration option by moving the mouse cursor over the configuration and click on the option to enter (or tap on the configuration option for XDS-1078) → Find and set the correct time/date AND time zone. IMPORTANT: time zone must be set correctly in the menu or via management software for scheduled playback → (OPTIONAL) Set a Password in the menus to prevent unauthorized changes. IMPORTANT: Password will be asked for when entering the setup menu during playback. 5 Click Set content button to configure your signage appliance to the content service if needed → For advanced player configuration, such as static IP, display resolution, and firmware update, visit www.digisignage.com for more information

management solution. Image Retention Disclaimer When an image is displayed on-screen for prolonged periods of time, you may see a faint image after it is replaced. This is expected normal behavior for displays. Image retention may be reduced by:  Avoiding still images shown on-screen for more than a few minutes  Using non-contrasting colors and brightness  Using background colors other than gray Troubleshooting How do I interrupt playback and enter setup menu? You can move your mouse cursor to the corner of the screen, press and hold the left key for 10 seconds to exit playback and enter setup menu. Some videos playback jumpy or incorrectly, How do I get the best video playback performance? We provide a video convert tool with a pre-configured profile for users to encode video to get best video playback performance. Visit www.digisignage.com to download video convert tool. Reset player to factory defaults (AC adapter is required) If modifying settings cause unintended results or if you have forgotten your password, please reset the player. Local contents will also be removed. 1. Press and hold the reset button with a pen. 2. Use AC adapter, re-connect the power cord while holding reset button.

system to initialize to factory default state.