DeWalt Flexvolt DCH733 Original Instructions Manual

total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. EC-Declaration of Conformity Machinery Directive Heavy-Duty Cordless SDS MAX Combination Hammer DCH733, DCH773 DeWALT declares that these products described under Technical Data are in compliance with: 2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010. These products also comply with Directive 2014/30/EU and 2011/65/EU. For more information, please contact DeWALT at the ...

 Denotes risk of fire. General Power Tool Safety Warnings  WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE The term “power tool” in the warnings refers to your mains- operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a ) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b ) Do not operate power tools in explosive atmospheres, such as in the presence of flamm ...

can be caught in moving parts. g ) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 4) Power tool use and care a ) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b ) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must ...

• Do not overheat the bit (discoloration) while grinding a new edge. Badly worn chisels require reforging. Do not reharden and temper the chisel. Residual Risks The following risks are inherent to the use of rotary hammers: • Injuries caused by touching the rotating parts or hot parts of the tool. In spite of the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These are: • Impairment of hearing. • Risk of squeezing fingers when changing the accessory. • Health hazards caused by breathing d ...

or fire. • In case of damaged power supply cord the supply cord must be replaced immediately by the manufacturer, its service agent or similar qualified person to prevent any hazard. • Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing the battery pack will not reduce this risk. • NEVER attempt to connect two chargers together. • The charger is designed to operate on standard 230V household electrical power. Do not attempt to use it on any other voltage. This does not apply to the vehicular ch ...

• DO NOT splash or immerse in water or other liquids. • Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 40 ˚C (104 ˚F) (such as outside sheds or metal buildings in summer). • Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire. Toxic fumes and materials are created when lithium-ion battery packs are burned. • If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid gets into the eye, ...

battery pack in a cool, dry place out of the charger for optimal results. NOTE: Battery packs should not be stored completely depleted of charge. The battery pack will need to be recharged before use. Labels on Charger and Battery Pack In addition to the pictographs used in this manual, the labels on the charger and the battery pack may show the following pictographs: Read instruction manual before use. See Technical Data for charging time. Do not probe with conductive objects. Do not charge damaged battery packs. Do not expose to water. Have defective cords replaced imme ...

rotary masonry and concrete drilling, chiseling and chipping applications. DO NOT use under wet conditions or in the presence of flammable liquids or gases. Your rotary hammer is a professional power tool. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool. • Young children and the infirm. This appliance is not intended for use by young children or infirm persons without supervision. • This product is not intended for use by persons (including children) suffering from diminished physical, sensory or ...

 WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect battery pack before making any adjustments or removing/ installing attachments or accessories. An accidental start-up can cause injury.  WARNING: Use only DeWALT battery packs and chargers.  WARNING: Risk of injury! Hazard presented by a falling battery. A falling battery may present a risk of injury to yourself and others. Check that the battery is securely seated in the tool. Inserting and Removing the Battery Pack from the Tool (Fig. B) NOTE: Make sure your battery pack  8  is fully charged. To Install the Battery Pack ...

 WARNING: Do not select the operating mode when the tool is running.  CAUTION: Never use in Rotary Drilling or Rotary Hammering mode with a chisel bit in the bit holder. Personal injury and damage to the the tool may result. Your tool is equipped with a mode selector dial   4  to select the mode appropriate to desired operation. Symbol Mode Application Rotary Hammering Drilling into concrete and masonry Hammering only Light chipping Bit Adjustment Chisel bit position adjustment To Select an Operating Mode • Rotate the mode selector dial so that the arrow points to the symbol corresponding for the desire ...

injury, turn tool off and disconnect battery pack before making any adjustments or removing/ installing attachments or accessories. An accidental start-up can cause injury. The charger and battery pack are not serviceable. Lubrication Your power tool requires no additional lubrication. Cleaning WARNING: Blow dirt and dust out of the main housing with dry air as often as dirt is seen collecting in and around the air vents. Wear approved eye protection and approved dust mask when performing this procedure.  WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic ...

DeWALT - Belgium BVBA Egide Walschaertsstraat 16 2800 Mechelen Tel: NL 32 15 47 37 63 Tel: FR 32 15 47 37 64 Fax: 32 15 47 37 99 www.dewalt.be [email protected] Danmark DeWALT (Stanley Black&Decker AS) Roskildevej 22 2620 Albertslund Tel: 70 20 15 10 Fax: 70 22 49 10 www.dewalt.dk [email protected] Deutschland DeWALT Richard Klinger Str. 11 65510 Idstein Tel: 06126-21-0 Fax: 06126-21-2770 www.dewalt.de [email protected] Ελλάς DeWALT (Ελλάς) Α.Ε. EΔΡΑ-ΓΡΑΦΕΙΑ : Στράβωνος 7 & Λ. Βουλιαγμένης, Γλυφάδα 166 74, Αθήνα SERVICE : Ημερος Τ� ...