Agilent Technologies 1100 Series Reference Manual

Technologies 1999 All rights reserved. Reproduction, adaption, or translation without prior written permission is prohibited, except as allowed under the copyright laws. Part No. G1311-90003 Edition 01/00 Printed in Germany Warranty The information contained in this ...

This manual contains technical reference information about the Agilent 1100 Series quaternary pump. The manual describes the following: • installation, • optimizing performance, • troubleshooting, • repairing, • parts and materials, • theory of operation, and • specifications. ...

How to install the quaternary pump 13 Site Requirements 14 Unpacking the Quaternary Pump 17 Optimizing the Stack Configuration 20 Installing the Quaternary Pump 22 Flow Connections of the Quaternary Pump 25 Priming and Purging the System 28 2 Optimizing Performance How to optimize the quaternary pump to achieve best chro- mat ...

46 Pump Status Indicator 46 Error Messages 47 Timeout 48 Shut-Down 49 Remote Timeout 50 Synchronization Lost 51 Leak 52 Leak Sensor Open 53 Leak Sensor Short 54 Compensation Sensor Open 55 Compensation Sensor Short 56 Fan Failed 57 Open Cover 58 Restart Without Cover 59 Zero Solvent Counter 60 Pressure Above Upper Limit 61 P ...

75 Index Limit 76 Index Adjustment 77 Index Missing 78 Stroke Length 79 Initialization Failed 80 Wait Timeout 81 Pressure Test 82 Running the Pressure Test 84 Evaluating the Results 86 Leak Test 88 Running the Leak Test 90 Evaluating the Results 92 4 Repairing the Pump Instructions on simple, routine repair procedures as well as ...

110 Exchanging the Pump Seals and Seal Wear-in Procedure 112 Exchanging the Plungers 115 Installing the Continuous Seal Wash Option 116 Exchanging the Wash Seals 119 Reassembling the Pump Head Assembly 121 Exchanging the Multi-Channel Gradient Valve (MCGV) 123 Exchanging the optional Interface Boar ...

165 Hydraulic Path 166 Cover Parts 167 Sheet Metal Kit 168 Foam Parts 169 Power and Status Light Pipes 170 Leak Parts 171 Pump Head Assembly 172 Pump Head Assembly with Seal Wash Option 174 Outlet Ball Valve Assembly 176 Purge Valve Assembly 177 Active Inlet Valve Assembly 178 Accessory Kit G1311-68705 179 Seal Wash Option Kit ...

198 Overview 199 Electrical Connections 204 Instrument Layout 206 Early Maintenance Feedback (EMF) 207 The Electronics 209 The Low-Pressure Pump Main Board (LPM) 210 Firmware Description 214 Optional Interface Boards 216 Agilent 1100 Series Interfaces 218 Setting the 8-bit Configuration Switch 223 The Main Powe ...