ADL X1 Q&a
Text of ADL X1 Q&a
X1 ≪ Q & A ≫
ADL X1 Q & A
Q1. Device/Computer does not recognize the X1
A1-1. Not connected correctly
(Refer to the X1 manual (Connectivity P.23) and check whether the X1 is connected correctly to portable
player/idevice via 3.5mm analog or USB-A inputs or whether the X1 is connected correctly to the computer
via USB cable)
A1-2. There is a problem with the cable.
(There may be a problem with the connected idevice cable, 3.5mm analog cable or USB cable
Q4. No sound from headphones
A4-1. X1 volume level is too low
(Adjust the volume with the X1 volume knob on the top panel)
A4-2. Digital player / idevice volume level is too low
(Set volume to maximum on the digital player / idevice and adjust the volume on the X1)
A4-3. Headphones or earphones have a MIC or Volume control on their cable
(With such headphones the 4 ringed 3.5mm connector cable supplied with the X1 must be used. Connect
player to the analog
Q11. Is it possible to use the X1 as a DDC between a computer and another DAC
A11-1. Connect the X1 to the computer via USB cable and by 3.5mm mini TOSLINK (Optical) cable to the
external DAC
Q12. Is it possible to use the X1 as a DDC between an idevice and another DAC
A12-1. This is not possible
Q13. Is the signal from an idevice converted to 16bit/48kHz?
A13-1. The signal from the idevice is not converted to 16bit/48kHz. It will be played at its original
Q20. During playback with an idevice connected to the X1 via digital cable the idevice volume can be adjusted.
Does this mean it is analog signal?
A20-1. No, for your convenience the idevice volume control will be enabled during digital playback. If the
indicator is flashing on the front panel then it is digital signal.
Q21. During playback with an idevice connected to the X1 how should I adjust the volume?
A21-1. We suggest lowering the volume on the X1 a
ADL X1 headphone cable directly with the Smartphone before connecting to the X1 to see if the MIC/remote
headphone cable is compatible with the Smartphone.