Eleiko WPPO Manual
Text of Eleiko WPPO Manual
The equipment must be installed and used in a place whose access and supervision are specifically controlled by the
owner.
Be sure to install the equipment on a stable base and properly level the equipment. ELEIKO recommends that all
equipment is secured to floor and installed by a licensed contractor or an ELEIKO-installer.
SAFETY INSTRUCTIONS
It is the responibility of the purchaser of ELEIKO products to instruct all users and supervising person
This product is used for WPPO powerlifting Bench press, competition
and training.
Add sufficient
clearance, not less
than 0,6 m, on all
sides. Taking into
account the
accessibility to
remove and replace
bar and weights.
Product weight
74 kg / 163 lbs
Max user weight
180 kg / 397 lbs
Max training weight
350 kg / 772 lbs
Dimensions (L x W x H)
2228x1246x1095 mm
98"x49"x43"
PRODUCT SPECIFICATIONS
FOOTPRINT AREA
The table below is general torque to use for different
threads. Use these torques, if nothing else is set. Below
numbers are for screw/nut of quality 8.8, 10,9 and 12.9.
Hex key
4 mm
Hex key
6 mm
Hex key
8 mm
Wrench
17 mm
Avoid electric screw drivers, most of the time they destroy more then they help.
THREAD
TORQUE (Nm / ftlb)
Quality 8.8
TORQUE (Nm / ftlb)
Quality 10.9
TORQUE (Nm / ftlb)
Quality 12.9
M6
9,8 / 7,2
14 / 10,3
17 / 12,5
Art no. 2000682-L45
x2
MC6S M10x90
Art no. 2000863-L90
x3
x5
x4
x18
x10
x6
RXS 5,5x19
Art no. 2000855-L19
MK6S M10x16
Art no. 2000765-L16
x16
M6x25
Art no. 2000682-L25
Washer
Art no. 2000889
Washer
Art no. 2000719
Nut M10
Art no. 2000718
RXS 5,5x32
Art no. 2000855-L32
MK6S M10x60
Art no. 2000675-L60
CONTENTS
Art no. 3085175A03
Pad support rear
Art no. 3061190A19
Side right
Art no. 3085157A04
Side left
Art no. 3085157A06
x1
Leg
Art no. 3061190A35
x2
Pad support front
Art no 3085175A01
Sign large
x1
Sign small
Art no. 3061190p70
x1
Padding small
Art no. 3061190A02
x1
x1
Upright
Art no. 3085157A09
Safety arm
Art no. 3085157A08
Pin
Art no. 2000799
x2
x2
x4
Padding large
Art no. 3085175A07
Safety support
Art no. 3085157A05
x2
CONTENTS
Sign small (x1)
Screw RXS 5,5x19 (x2)
Pad support front (x1)
Pad support rear (x1)
Screw M6x25
Washer (x4)
Screw MK6S M6x45
Washer (x14)
Screw M10x90
Washer (x2)
Nut M10
Washer (x2)
Leg (x2)
Screw RXS 5,5x19 (x4)
Sign large (x1)
Screw MK6S
M10x16 (x2)
Screw MK6S
M10x16 (x4)
1.
Make sure floor is clean
and no sharp edges or anything
that can damage the upholstry,
Place the two paddings upside
down according to picture.
ASSEMBLY INSTRUCTIONS
Safety arm (x2)
Safety support (x2)
Screw MK6S M0x16
(x4)
Side left (x1)
Side right (x1)
Pin (x2)
Pin (x2)
Screw MK6S M0x16
(x4)
2.