AvMap Geosat 6 APRS Function Manual
Text of AvMap Geosat 6 APRS Function Manual
III. Activating the APRS mode
6
IV.
Finding APRS Contacts
7
V.
Managing APRS contacts
10
VI. Setting an APRS contact as Target
11
VII. Messaging to APRS contacts
13
VIII. APRS Options
15
IX. Compatibility
16
X.
Technical Specifications
18
Appendix: Units setup
20
AvMap - 3
Table of contents
APRS is a method for sending and receiving position and
other information over a radio transceiver.
The Geosat 6 APRS is ready to accept APRS inputs from a
radio transceiver and to provide fix position output data
to the transceiver in order to transmit its current position.
Geosat 6 APRS provides GPS location information for your
transmitted APRS beacons, and it shows received APRS
information on its map display.
The Geosat 6 APRS comes with an APRS cable
How to set-up your transceiver:
Enter your call sign
•
BAUD Rate=9600
•
Waypoint=ALL
•
Waypoint size=9 character (this as also called
•
waypoint length)
Beacon method = Smartbeaconing
•
(if your device supports this)
Waypoint output=ALL
•
If you are using a Kenwood D72 turn off F-1
•
Internal GPS
How to set-up your Geosat 6 APRS:
The Geosat 6 APRS is defaulted to 9600 BAUD rate. If
your radio device supports 4800 BAUD rate you can
change this
AvMap Geosat 6 APRS To enter in the APRS mode, open the main navigation
menu and press the APRS Functions button. To enable or
to disable the APRS mode, press the Enable/disable APRS
Button in the APRS Functions Menu. Push this button to
enabled or disable the other buttons.
The APRS Functions menu includes four buttons:
Disable/Enable APRS
•
APRS contacts
•
Messages
•
Options (APRS Settings)
•
The Messages button is available when Geosat 6 APRS is
connected to a comp
APRS icons on the map:
As soon as you connect Geosat 6 APRS to your transceiver
you will start receiving APRS positions called “APRS
contacts”. Geosat 6 can store up 1000 APRS contacts and
display them on the map.
You can watch APRS activity right on the screen and you
can distinguish between fixed and mobile APRS stations.
Static positions are represented by blue bulls-eye icons
along with the associated call sign. If the Geosat 6 APRS
is used with a
sort them or delete them by entering the APRS contacts
Menu. To enter in the APRS Contacts Menu, press the APRS
Contacts button in the APRS Functions menu. The APRS
contacts folder shows all APRS contacts received from the
connected radio. Touch one APRS contact on the list to
open the Full info page.
Full info on APRS contacts:
You have detailed info on stationary and moving APRS
contacts as Geosat 6 APRS fully takes advantage of the
Kenwood format senten
: Touch this button to delete the selected
APRS contact from the APRS contact list.
Save as contact
•
: touch this button to save the
selected APRS contact as a standard Contact.
This may be useful to save the Call Sign position
so to change icon or to add telephone number; in
this way the contact is available even if the APRS
functions are disabled. Contacts can be accessed
from the Main Menu / My Data page.
Show on Map
•
: touch this butto
AvMap Geosat 6 APRS Geosat 6 APRS can auto-delete the received APRS
contacts positions based on a user defined timeout. You
can also sort your APRS contacts based on alphabetical
order or received time. Touch the Options button in the
APRS menu.
Contacts sorting:
Touch Contact sorting, and then choose to sort the APRS
Folder based on call sign or date-time.
Contacts Timeout:
Touch Contacts timeout and choose to automatically
delete contacts from the APRS Contacts Folder based
On the full info page of the APRS contact, you can set the
APRS contact as Target, by touching the Set as Target button.
This allows you tracking a moving APRS contact: you will have
a shortcut on the map to display the position of the target,
and you will be able to monitor info relative to the target in
the data boxes in the left side of the map.
Intercepting the target:
After you set the APRS contact as Target, a pop-up window
asks you if you want to s
right corner of the screen.
Tracking the position of the target:
Once you have set the APRS contact as target, the
Target button with a target icon and the target CALL
SIGN is displayed in the lower right corner of the map.
By default the map is centered on your position, touch
the target button to centre the map on the target.
To go back to view your own position on the map,
touch the car button in the lower right corner of the
map.
Monitoring the info in
The Messages page is enabled when a Geosat 6 APRS is
connected to a compatible radio transceiver or modem
supporting the Messaging function. Find the list of Geosat
6 APRS compatible radio transceivers and modems
supporting messaging on line www.avmap.us or/and www.
avmap.it.
Once the Geosat 6 APRS is connected to a modem/radio,
the messaging menu will be available to read received
messages even if the modem is not connected anymore.
In the Message Menu yo
To change the characters from small to CAPITAL,
•
use the buttons on the right: “A” for the Capital
keyboard or “a” to go back to the small keyboard.
Once the text has been completed, touch enter.
•
Insert the recipient’s by touching Edit Recipient.
•
Now you can select one or more recipients from
the APRS contact list.
Touch “accept”.
•
Touch send message.
•
Once the message has been sent, the Software will go
back to the map
In the APRS options menu you can edit settings for
the contacts management: Contacts sorting (Chap V),
Contacts Timeout (Chap V), for Messages display (Chap
VII), and for the Serial Port (Chap II).
VIII. APRS Options
AvMap - 15
AvMap Geosat 6 APRS The Geosat 6 APRS comes with an APRS bi-
directional RS-232 APRS interface compatible with
all APRS Kenwood amateur radios models and with
all the TNC (Terminal Node Controllers) that
support NMEA format sentence.
Current APRS ready Kenwood transceivers include:
TH-D7A/E
•
TM-D700A/E
•
TM-D710A/E
•
TH-D72A/E
•
Kenwood
format
sentence
compatible
radio
transceivers If the radio’s TNC supports the Kenwood
format sentence you can get the best out o