Cypress PSoC CapSense Quick Start Manual

Text of Cypress PSoC CapSense Quick Start Manual

PSOC® CAPSENSE® EXPANSION BOARD KIT

QUICK START GUIDE Install Software 1. Insert the kit DVD. 2. Install PSoC Creator, PSoC Programmer, and the kit project software. Board Setup for PSoC Development Kit 1. Install the CY8C38 Family Processor Module on the PSoC Development Kit. 2. Connect MiniProg3 to the CY8C38 Family Processor Module. 3. Ensure default settings are configured and power the PSoC Development Kit. Program the PSoC Device 1. Open BMM_USB_KI

© 2011-2013 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered

trademarks referenced herein are the properties of their respective owners. Doc.#: 001-66478 Rev. *B http://www.cypress.com/go/CY8CKIT-031 For the latest information about this kit, visit PSOC® CAPSENSE® EXPANSION BOARD KIT QUICK START GUIDE Programming with PSoC 3 Develo

Cypress Microcontrollers Owners Instructions: