ZKTeco 8000 Series Quick Start Manual

property. Please read this document carefully before using the product and keep this operation guide for future reference. As shown below, the preventive measures are divided into “Warning” and “Caution”. Warning: may lead to death or seriou ...

 Please do not drop or damage the product.  Do not touch the optical component of the image sensor. You may wipe the dust with a clean and slightly moist cloth with a bit alcohol. When the device is not in use, please cover the lens to protect the image sensors ...

1.1 Product Features IP Camera is an embedded digital surveillance product that integrates the traditional analog camera and network video server. It uses an embedded operating system and a high-performance processing platform, highly efficient system scheduling and its code is curing in Flash. It’s small-sized with high stability ...

2 Hex screw Adjust the 3 Dimension 3 Base The bottom part of the camera 4 Lens Lens 5 Network cable RJ45 connector, PoE 6 Power cable DC 12V ...

There are typically two installation methods for IP cameras of this series: mount on the wall or mount to a ceiling. Below is the installation steps to mount a camera on a wall and to a ceiling. 2.1 Camera Installation Caution: the wall on which the device is going ...

3.1 Network Connection Make sure the camera is connected to the network properly. Please also check the state of the local network of the PC. If the state shows the icon, the network connection is failed. The initial default IP address of the camera is 192.168.1.86. Please set the IP address, subnet mask and gateway for your computer. P ...

address is “192.168.1.86”）, then the system will show you the login interface. Then, input your camera’s “User Name” (Default: admin), “Password” (Default: 123456) and click on “Login”. Caution: Detailed functions and configuration of ...