Zebra XiIII Maintenance Manual


 
 
90Xi IIIPlus™96Xi IIIPlus 140Xi IIIPlus™ 170Xi IIIPlus™ 220Xi IIIPlus™ ...


 
 
90Xi IIIPlus™96Xi IIIPlus 140Xi IIIPlus™ 170Xi IIIPlus™ 220Xi IIIPlus™ ...

parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the expressed written permiss ...

Xi III, Xi IIIPlus, and R-140 Maintenance Manual iii
 


 

 
  
 
 DESCRIPTION .......................................................................................................................... 1-1 SCOPE ........................................................................ ...

48152L Rev. 4 11/1/04
 


 
  INTRODUCTION ....................................................................................................................... 2-1 UNPACKING AND INSPECTION............................................................................ ...

Xi III, Xi IIIPlus, and R-140 Maintenance Manual v
 

Xi IIIPlus Setting the Print Speed........................................................................................2-24 Setting the Tear-Off Position..............................................................................................2-24 Selecting the ...

48152L Rev. 4 11/1/04
 

Backfeed Sequence........................................................................................................... 2-40 Setting the Label Top Position ........................................................................................... 2-40 Setting t ...

Xi III, Xi IIIPlus, and R-140 Maintenance Manual vii
 


 
  

   MAINTENANCE CONCEPTS.................................................................................................... 4-1 SAFETY INFORMATION............................................................................ ...

48152L Rev. 4 11/1/04
 

Take Label (Label Available) Sensor Alignment ................................................................ 4-37 Media Tracking Adjustment ............................................................................................... 4-38 Rewind Mode .......... ...

Xi III, Xi IIIPlus, and R-140 Maintenance Manual ix
 

Install DC Stepper Motor..............................................................................................4-80 Black Mark Sensor Replacement.................................................................................4-81 Sensor Removal............... ...