Yamato PPC-300 Technical Manual

YAMATO CORPORATION 1775 S. Murray Blvd. Colorado Springs, CO 80916 USA Tel (719) 591-1500 Fax (719) 591-1045 YAMATO TECH CORPORATION #112-19425 Langley By-Pass Surrey, B.C. V3S 6K1 Canada Tel (604) 533-2338 Fax (604) 533-0827 www.YamatoCorp.com NTEP CC 08-041 ...

Table of Contents I Introduction 1 Conventions 1 Safety Precautions 1 II Description 4 Name and Function of Parts 4 Specifications 5 III Calibration 7 Enter Test Mode 7 Calibrate the Scale 8 IV Setup 9 Changing Parameters 9 User Mode 10 System Mode 10 Factory Mode 10 Parameter Tables 11 Capacity Specific Tab ...

This technical manual provides you with information on configuration and repair of the PPC-300 and PPC-300D. Setup and operating instructions can be found in the PPC-300 & 300D Operation Manual. Before using the scale, carefully read, understand, and follow the “Safety Precautions” described in this man ...

Danger - To Avoid Fire and Electric Shock Do not operate the scale if there is smoke or a burnt smell coming from the scale. Remove the batteries or unplug the AC adaptor immediately. After making sure there is no danger, consult your dealer. Never try to repair the scale yourself! Warning Do not ...

To keep the scale working efficiently Place the scale on a flat stable surface that will support the scale and the load. Do not place the scale in an area exposed to direct sunlight or to wind currents from an air condi- tioner, otherwise, the measurements will not be accurate. Do not place the scale near m ...

II Description 4 Name and Function of Parts 1) ON/OFF Key Press to turn the power on or to enter function mode. Hold to turn power off. 2) Zero Key Press to zero the display, select a digit, select the next parameter, or store a setting. Simultaneously press the Zero and Tare keys to enter user paramete ...

Name and Function of Parts Specifications Weighing system: Strain‑gauge load cell Platform: 9.0” x 7.9” (230 x 200 mm), stainless steel Capacities and divisions: Kilogram Pound Ounce Pound-Ounce* Max. Tare 2 kg x 0.001 kg 4.4 lb x 0.002 lb 80 oz x 0.05 oz 5 lb x 0.05 oz Capacity 4 kg x 0.002 kg 10 lb x ...

6 II Description Specifications Dimensions: 228 200 242 198 178 288 113~120 ...

Enter Test Mode Test mode provides access to calibration, system and factory parameter modes, and to some opera- tional values. To enter test mode: 1. Remove the stainless steel pan and place the scale on its side. 2. Open the battery cover and remove the four screws in the deep wells. Remove the scale p ...