Yakima BLOCKHEAD Quick Start Manual

Text of Yakima BLOCKHEAD Quick Start Manual

Part #1032037 Rev A

Set the bicycle forks onto the skewer. Align block with drilled holes. Use the template below to scribe two drilling points. • Use 1/4" (6mm) mounting hardware. • Always check handlebar clearance before attaching block. Pivot the bolts or screws into place. T E M P L A T E Tighten hardware securely. Test installation by pulling and shaking. Replace skewer and attach the nut. DRILL POINT DRILL POINT Test security by tu
Part #1032037 Rev A Le bloc de retenue de fourche BlockHead verrouillable se fixe solidement aux surfaces plates. Visserie recommandée pour l’installation: boulons ou vis de 6 mm (1/4 po), rondelles de protection, écrous autofreinés. Engager la fourche du vélo sur l’axe. Vérifier la solidité du montage en tirant sur la fourche. Si la fourche se dégage de l’axe, ouvrir le levier et serrer l’écrou un peu plus. Rabattre le levie

Yakima Automobile Accessories Owners Instructions: