XTZ Microphone Pro Manual
Text of XTZ Microphone Pro Manual
Microphone system to use with room correction software or
acoustical measurement systems
Quick Guide
© 2014 XTZ Sound, www.xtzsound.com
Table of Contents
Page:
Introduction
3
About XTZ
4
Unpacking
5
Connectivity guide
6
Service & support
8
The Microphone Pro offers many possibilities
in guiding you to calibrate and analyze your
hifi or home theater system.
It takes patience to get a hifi system or home
theater system carefully optimized.
Please read the full manual for further and
more detailed information.
Please feel free to contact our “free of charge”
support if you lack experience of acoustical
measurements or have any questions.
WARNING!
The microp
Our reference and starting point is to reproduce a
natural sound, but we still pay attention to the fact
that sound is a personal matter of taste.
With the Microphone Pro system we can help you
reach this goal.
XTZ Goals
To offer the best price/performance/quality
ratio on the market
Our concept:
•
To produce the perfect compromise
•
Cost-effective manufacturing at a large scale.
•
The quality of our products is more
important
Check that the items below are included in the
package:
Included items
1 Microphone
1 Connection aluminum box (sound card)
1 USB cable fixed to the sound card, 3 m
1 XLR to XLR for the microphone, 4 m
1 XLR to RCA audio cable, 5 m
1 Y-split cable
Installation
Made to be used with room correction softwares such
as Amarra Symphony with iRC and Dirac Live Room
Correction Suite.
Can also be used with acoustical measurement
s
Connect the USB-chord to your computer USB-
port. Make sure it pops up as an active microphone
(recording device) and sound card. It should be
specified as “XTZ Audio 2 Pro”.
2.
Connect the microphone to the XLR connector
labeled MIC the sound card.
3.
Connect the supplied XLR-RCA-cable from AUDIO
OUTPUT to a line input on your
amplifier/receiver/subwoofer.
Note: Only needed if use of acoustical
measure
External noise from trucks, train, traffic etc can easily
disturb the measurement process.
If the measurement result looks strange in any way you
should do the same procedure again once or maybe twice. If
you get the same result again you can be sure that it is
correct.
Finally
Please remember that “good” sound is a matter of taste, so
you have to experiment to obtain your personal goal. We
wish you best of luck!
Service & support
Where to send the
product for warranty
service?
For service we refer to our retailers.
If you have questions about servicing, please
contact our support:
Email: [email protected]
Website: www.xtzsound.com
Always pack the product/part very
carefully as transportation damages
are common. If the packaging is
insufficient, the courier will not pay
for the damages.
Always include a copy of you receipt
and a description of the problem.
Support