WinnWell PRO FORM Assembly Instructions
Text of WinnWell PRO FORM Assembly Instructions
PRO FORM REGULATION HOCKEY NET
WITH QUIKNET MESH SYSTEM AND BACKSTOP
Please ensure all part numbers are
accounted for prior to installation
Missing Parts, Required
Replacements, or Inquiries
with Assembly
Please Contact
ASSEMBLY INSTRUCTIONS
-Page 1-
STOP
1. Remove all parts from packaging and carefully remove pipe plugs
without damaging the pipe openings.
2. Begin by gathering parts (A)-(M).
3. Ensure you have enough room to begin the assembly (10 ft x 5 ft)
4. Begin the assembly from the base and work your way to the top.
5. Refer to diagram for instruction
(*Note: Connections may ft snug so if necessary use a rubber mallet)
Instructions to Build:
4’x 6’ Steel Hockey Goal
-Page 2-
Attaching the QuikNe
Instructions to Build:
The Backstop (Sides)
PART NO.
SKETCH
QTY
2
2
4
1
1
1
1
4
4
2
8
8
1
1
2
3
3
6
7
1
2
8
2
8
3
3
4
5
1
3
4
5
6
7
8
1. Begin by gathering parts (1)-(8).
2. Refer to the diagram above for assembly
(Note: Connections may ft snugly so if necessary use a rubber mallet)
3. Once the two frames have been assembled, you can attach the netting
4. Begin by fastening the 4 corners of the netting to the 4 corners of the
frame using the zip ties provi
Instructions to Build: The Backstop (Top) & Pocket Target
PART NO.
SKETCH
QTY
1
1
10
1. Begin by gathering part (15).
2. Ensure that the thick strap on the netting is at the top when
you begin assembly.
3. Secure the top straps of the netting to the wire weld on the inside
corner of the frames using the white 1’ string provided.
4. Next you can secure the bottom corners of the top net to the steel
loops on the side panels using the 1’ string provided.