Winners Only DK24072 Assembly Instructions

Thank you for purchasing this quality product. Be sure to check all packaging materials carefully for small parts that may have come loose inside the carton during shipment. COMPONENTS LIST DK24072T C D E 1 PC 2 PCS 2 PCS Mounting Plate Mounting Block Wood Stretcher 1 PC A Table Top 3 Wrench 6 4 PCS Hex Nut 4 5 Allen Key 7 Wood Screw 8 16 PCS Flat Washer 4 PCS 4 PCS HARDWARE LIST 2 4 PCS QTY SKETCH DESCRIPTION NO. 1 Short JCBC Bolt 10 PCS 8 2 A D C Soft Protective Surface 8 3 STEP 1 Place Table Top (A) upside down on a soft protective surface such as a carpet. Align & fasten Mounting Block (D) to Table Top (A) using Long JCBC bolt with small washers (2) and fully tighten with Allen Key (8). STEP 2 Align & fasten Mounting Plate (C) to Mounting Block (D) using Long JCBC bolt with large washers (3) and fully tighten with Allen Key (8). 1 OF 2 NO. DESCRIPTION SKETCH QTY SIZE 1 PC 1 PC M6X16mm M6X35mm Ø ØØ Ø13mm Ø ØØ Ø18mm 16mm Ø ØØ Ø13mm Long JCBC Bolt with small washers Spring Washer MADE IN MALAYSIA 9 Long JCBC Bolt with large washers M6X40mm 2 PCS COMPONENTS LIST DK24072B B 2 PCS Table Leg Frame NO. DESCRIPTION SKETCH QTY F 1 PC Hardware Bag IMPORTANT NOTE: -Please keep all hardware parts out of the reach of children. -Two or more people are needed for assembly. CAUTION : Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed staple tips can cause injury, therefore, for your protection, please remove any exposed staples used in packing. 1.We recommend that you should assemble this product with assistance of another person, this will make assembly easier, and will help to eliminate damage to the product or injury to persons during assembly. 2.Be sure to check all packing material carefully for small parts that may be come loose inside the carton during shipment. 3.Please do not over tighten screws or bolts. 4.Please put all the parts on a non- abrasive floor before assembly and follow the assembly steps to assemble your newly purchased product correctly and efficiently. Reminders : 1. Use only the hardware supplied. 2. This item may require periodic tightening.

(Not Included) STEP 3 Align Table Leg Frame (B) to Table Top (A) using Short JCBC Bolt (1) and fully tighten with Allen Key (8). Then using a philips screwdriver to tighten wood screws (9). 9 STEP 4 Attach Wood Stretcher (E) to Mounting Plate (C) using Spring Washer (4), Flat Washer (5), Hex Nut (6) and fully tighten with Wrench (7). Attach Wood Stretcher (E) to Table Leg Frame (B) using Short JCBC Bolt (1) and fully tighten with Allen Key (8). STEP 5 Turn the table to upright position. Assembly is now complete. Thank you for purchasing this product. ASSEMBLY INSTRUCTIONS 2 OF 2 A B C ~ Be sure to use the same type of polish consistenly. Your furniture will appear cloudy or streaky if oil based or wax are interchanged. ~ Spray your furniture surface evenly. Wipe in a circular motion with a soft clean cloth. CARE INSTRUCTION PROD. NO: DK24072 ® WINNERS ONLY