Winmate GC Series Quick Start Manual

19”~23.8” G-WIN Panel PC Intel® Core™ i3/ i5/ i7 Model No. R19IK7T-GCM1 W22IK7T-GCA3 W24IK7T-GCA2 GC Series Quick Start Guide Document Version 1.0 Document Part No. 91521110105N ...

Contents Preface 3 Chapter 1: Introduction 6 1.1 Introduction 7 1.2 Features 7 1.3 Package Content 7 1.4 Product Overview 8 1.5 Physical Buttons and LED Indicators 10 Chapter 2: Getting Started 11 2.1 Wiring Requirements 12 2.2 Turning On and Off Your Device 12 2.3 Connecting to Other Devices 13 Chapter 3: Mounting 16 3.1 VESA Mount 17 3.2 Panel Mount 17 Chapter 4: Operating the Device 18 4.1 Opera ...

Operation is subject to the following two conditions:  This device may not cause harmful interference. This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class "B" digital device, pursuant to part 15 of the FCC rules. These limits are designed to pr ...

Copyright Notice No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners. Disclaimer Winmate Inc. reserve the right to mak ...

you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings. The following is an example of each type of advisory. Note: A note is used to emphasize helpful information Important: An important note indicates information that is important for you to know. Caution A Caution ...

Chapter 1: Introduction This chapter gives you product overview, describes features and hardware specification. You will find all accessories that come with the panel PC in the packing list. Mechanical dimensions and drawings included in this chapter. ...

1.1 Introduction Congratulations on purchasing Winmate® G-WIN GC Series Panel PC. The elegantly designed, yet rugged, industrial grade G-WIN GC series is designed for heavy duty applications. With rugged construction, ultimate computing power, G-WIN GC Series Panel PC are guaranteed to meet "heavy duty" needs. This series feature high computing power and user-friendly interface with projected capacitive multi-touch (PCAP) techn ...

1.4 Product Overview 19”, R19IK7T-GCM1 Unit: mm 21.5”, W22IK7T-GCA3 Unit: mm № Description № Description ① Power On Button ⑥ 2 x RJ45-10/100/1000 Mbps ② Reset Button ⑦ DP 1.2 ③ 1 x RS-232/422/485, 2 x RS-232 ⑧ HDMI 1.4 ④ Mic in/ Line out ⑨ 12V DC IN ⑤ 4 x USB 3.0 ⑩ Brightness Adjustment Knob ...

23.8”, W24IK7T-GCA2 Unit: mm № Description № Description ① Power On Button ⑥ 2 x RJ45-10/100/1000 Mbps ② Reset Button ⑦ DP 1.2 ③ 1 x RS-232/422/485, 2 x RS-232 ⑧ HDMI 1.4 ④ Mic in/ Line out ⑨ 12V DC IN ⑤ 4 x USB 3.0 ⑩ Brightness Adjustment Knob № Description № Description ① Power On Button ⑥ 2 x RJ45-10/100/1000 Mbps ② Reset Button ⑦ DP 1.2 ③ 1 x RS-232/422/485, 2 x RS-232 ⑧ HDMI 1.4 ④ ...

1.5 Physical Buttons and LED Indicators Physical buttons and LED indicators located on the rear side of the panel PC. Physical Buttons Icon Button Description Reset Press to reset the system Power On/ Off Press to power on or power off the device LED Indicators LED Type Status Description On Power is on Off Power is off Blinking Storage activity (Data is being read or written) Off System is idle ...

Chapter 2: Getting Started This chapter tells you important information on power supply, adapter and precautions tips. Pay attention to power considerations. ...

2.1 Wiring Requirements The following common safety precautions should be observed before installing any electronic device: Caution • Strive to use separate, non-intersecting paths to route power and networking wires. If power wiring and device wiring paths must cross make sure the wires are perpendicular at the intersection point. • Keep the wires separated according to interface. The rule of ...

Caution Use only the AC adapter (12V/ 84W) included in your package (Rating: Output 4.2 A). Using other AC adapters may damage the device. Attention Utilisez uniquement l'adaptateur secteur (12V / 50W) inclus dans votre emballage (puissance nominale: sortie 4,2 A). L'utilisation d'autres adaptateurs secteur peut endommager l'appareil. To shut down the device: 1. Tap Start >Shut down. 2. Wait for your Panel PC to completely ...

Pin assignment and signal name of serial port connector Caution It is recommended to use factory jumper settings. Opening the housing when it is sealed may damage the device and its parts. Attention Il est recommandé d'utiliser les paramètres des cavaliers d'usine. L'ouverture du boîtier lorsqu'il est scellé peut endommager l'appareil et ses pièces. 2.3.3 RJ45 Connector G-WIN GC Series Panel ...

2.3.5 HDMI Connector Use HDMI 1.4 connector to connect the panel PC to external monitor. Pin assignment and signal name of HDMI 1.4 connector 2.3.6 Display Port Connector G-WIN GC Series Panel PC has one DP 1.2 connector to connect the panel PC to external monitor. Pin assignment and signal name of DP 1.2 connector Pin № Signal Name Pin № Signal Name 1 TMDS_DATA2+ 2 GND 3 TMDS_DATA2- 4 TMDS_DATA1+ 5 GND 6 TMDS_DATA1- 7 T ...

Chapter 3: Mounting This chapter provides mounting guide for all available mounting options. Pay attention to cautions and warning to avoid any damages. ...

3.1 VESA Mount This device supports VESA Mounting and provides various types of mounting options to fit any industrial use or vehicle. Size VESA Plate 19”, 21.5”, 23.8” 75x75 mm,100x100 mm Mounting Instruction 1. Use Philips M4x5 screws to fix the desk stand to VESA holes on the back cover of the device. 2. Follow installation instructions supplied with your VESA Mount accessories. *The picture is for demonstration purposes o ...

Chapter 4: Operating the Device In this chapter you will find instructions on how to operate the device. ...

4.1 Operating System The Panel PCs supports Windows 10 IoT Enterprise operating system. 4.2 Multi-Touch The touch screen supports the core gestures for Windows. Gesture Windows Usage Gesture Action Action Tap/ Double-tap Click / Double-click Click or double-click Panning with Inertia Scrolling Drag one or two fingers up and down Selection/Drag (left to right with one finger) Mouse-drag/ Selection Drag one finger left/ri ...

4.3 How to Enable Watchdog To enable Watchdog, you need to download Winmate Watchdog utility. Find more information on Watchdog in “Watchdog Guide” that you can download from Winmate Download Center or File Share. To enable watchdog in Watchdog AP follow the instructions below: 1. On the right bottom side of the desktop screen, click triangle button to show hidden icons. 2. Click icon to ope ...