Winco 8500 Customer Instructions

Text of Winco 8500 Customer Instructions

Page 1 of 4

006060 Rev. 02 Date: 03/04/20 NCG 1. READ AND FOLLOW ALL DIRECTIONS. 2. NEVER stand on table or INJURY MAY OCCUR. 3. NEVER allow user to sleep unattended on table or INJURY MAY OCCUR. 4. NEVER leave an unconscious user unattended on table or INJURY MAY OCCUR. 5. DO NOT use table for transporting user in or with ANY type of vehicle or trailer. Winco tables have not been tested or approved for use by an occupant in an

Page 2 of 4

006060 Rev. 02 Date: 03/04/20 NCG 4. Place (4) ¼-20 x 1-½” carriage bolts into the (4) square holes through the Lower Leg Brace of the Table Legs. Heads of screws should face the ends of table, for better appearance. 5. Install the Cross-brace. Welds on the Cross-brace must face down toward floor when the table is upright. Attach with the (4) screws that you just installed on step 4 and secure with (4) ¼-20 nu

Page 3 of 4

006060 Rev. 02 Date: 03/04/20 NCG Parts Reference Visit our website www.wincomfg.com/product-documents/parts-lists for a complete parts list of your table or call Customer Service at 1-800-237-3377 to request it by mail. GENERAL CARE AND CLEANING: Periodically inspect tightness of all screws, bolts, and nuts. Winco furnishings are built to provide durable reliable service when properly cared for. In general, all our

Page 4 of 4

006060 Rev. 02 Date: 03/04/20 NCG Design, appearance, parts, & construction are subject to change without notice

Winco Indoor Furnishing Owners Instructions: