WilTec 51552 Operation Manual

51552, 51553 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificantly. Updating the doc ...

document can be copied or duplicated in another form without the prior written consent of WilTec Wildanger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in this user manual or the connection diagram. Although WilTec Wil ...

switch can turn the pump on and off automatically. The thermal protection of the motor can automatically turn the engine off if it is running too hot or overburdens itself, therefore security measures are kept in force even in roughest conditions. Th ...

guarantee is no longer valid if the damage is caused by dry running.  The submersible pump must not be used for swimming pools.  The pump cannot be employed for potable water circuits. WARNING: Read all safety guidelines and instructions carefully. Non-complia ...

1. inefficient voltage supply 2. impeller blocked 3. electric winding blown 4. condenser broken 5. a phase is missing (with 380 Volt) 6. too high cable resistance 1. turn tension to +/- 10 % 2. remove blockage 3. exchange 4. change condenser 5. check switch and cable connection 6. ...

implemented in the law related to electrical and electronic equipment and appliances. All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this e ...