Wilson Electronics 901135 Installation Manual

draw on the wall where you want your screws. for Panel Antenna Use the 1. mount itself as a guide to draw on the wall where you want your screws. asfds 1. asdfa 1. Attach the mount to the wall, 2. using a screw driver. asfds 1. asdfa 1. Attach the mount to the wall, 2. using a screw driver. Contact Wilson Electronics Tec ...

email: [email protected]. Hours: 7 am to 6 pm MST. 1. 2. Use a screw driver to loosen the 3. two sides, move the two sides to the desired angles, then re-tighten the screws. 1. 2. Use a screw driv ...