Well Track Installation And Operating Manual
Text of Well Track Installation And Operating Manual
Installation and Operating Manual
Head Up Display
Model: Track
Thank you for choosing WELL. Please read carefully the following instructions and keep them within reach.
Preorder NO.: HUD-4.2-TRACK-WL
Thanks for purchasing our OBD smart digital device. This product connects car OBD2 interface by OBD cable, and display the
driving data, e.g. vehicle speed, engine RPM, water temperature, fuel consumption etc. It can keep the driver’s eyes always on
road to avoid the dangerous of lowering down head to read the dashboard. This product won’t change any car ECU data.
OBD smart digital device is equipped with a very powerful detection for error code, the d
Setting button functions
1. Short press in:(1) switch the display mode (2)confirm the menu after enter into the menu
2. Push left:(1)switch the left area functions(2)change the function setting after enter into the menu
3. Push right:(1)switch the right area functions(2)change the function setting after enter into the menu
4. Long press in: after enter into the menu and finish the setting, long press in for 5 seconds to keep and exit.
Push left/right to sw
in the menu(setting) mode, all the default value can be changed, push left is to decrease, push right is to increase
Language Set: Please choose your familiar language(English/Simplified Chinese/Traditional Chinese)
Sound Switch: turn on/off the buzzer
Speed Alarm: the default value is 150 (the default value can be changed, push left is to decrease, push right is to increase)
Coolant alarm: default value is 120°, it means this device wil
RPM alarm: default value is 6000 r, it means this device will give alarm when RPM over 6000 r
BAT Alarm: default value is 10.5V, it means this device will give alarm when battery voltage is lower than 10.5V
Speed Adjust: adjust the speed according to the dashboard, default value is 107%
Speed Offset: When the vehicle turns off, but the device speed is not 0, then adjust the device Speed Offset value, if the
device speed shows 5KM/H, then change the device
Speedup test: show the speed, distance, the time for 400m and the time for 100KM/H
Brake Test: show the speed, brake distance and time
Data Stream
Show all the vehicle data stream
OBD smart digital device installation
1.Know your vehicle brand, the OBD smart digital device work for cars with OBDII agreement or EU OBD agreement. Open the
engine hood and find the sticker below it (see the below picture 1), if it has words like OBDII CERTIFIED, then it can be
Product size: 107x57x20 mm
Product Weight: 50 g
Troubleshooting
1.The screen without any display, and no power
Start the car engine; check if the OBD cable line is tight; please pull down the OBD cables more times to ensure; check if
product power switch turns on. If still no display ,please change another car to test, analyse whether the car OBD diagnostic
interface is good, if it is not good, please repair it and try again.
2.Only shows the car voltage a