Waves WRC-1 Operation & User’s Manual
Text of the manual
WRC-1 Wi-Fi Router / User Guide
2
About WRC-1
WRC-1 is an advanced Wi-Fi router designed specifically with the needs of live sound engineers in mind. It’s a
perfect match with the Waves MyMon Personal Monitor Mixing app for mobile devices, as well as other remote-
control mixing apps.
Features and Highlights
•
Dual-band gigabit Wi-Fi router
•
Standard
WRC-1 Wi-Fi Router / User Guide
3
Rack Installation guidelines
The rack placement and operational environment for the WRC-1 can affect the wireless signal range and coverage.
For best results, follow these guidelines:
• Mount the WRC-1 near the top of the rack and away from any other gear that may use radio waves in the
same 2.4 GHz or 5 GHz range. Note th
WRC-1 Wi-Fi Router / User Guide
4
Setting Up WRC-1 for Use With eMotion LV1 and the MyMon App
1. Attach the supplied antennas to the WRC-1 unit. Do not force the connection, as antennas marked 2.4 GHz will fit
only the 2.4 GHz sockets and antennas marked 5 GHz will fit only the 5 GHz sockets.
2. Connect the AC cable and power up WRC-1.
3. If you want to use
WRC-1 Wi-Fi Router / User Guide
5
Set 5G Wi-Fi Password Using WRC-1 Management Software.
1. Disconnect the computer that you will use to configure WRC-1 from all connected networks and disable Wi-Fi.
2. Connect any available WRC-1 LAN port to a port on the computer, using Cat 5e cable.
3. Open a browser and type: 192.168.2.1, followed by Enter.
4. When, prom
WRC-1 Wi-Fi Router / User Guide
6
Resetting WRC-1
RESET USING ROUTER MANAGEMENT SOFTWARE
Repeat steps 1–4 as above, then:
5. Click the System Management tab on the left sidebar.
6. Click the Restore Settings Tab on the top left side of the System Management page.
7. Click Perform Reset next to “Factory Reset” and follow the prompts.
RESET USING THE RES
WRC-1 Wi-Fi Router / User Guide
7
Updating WRC-1 Firmware
To update WRC-1 firmware, repeat steps 1-4 as above, and then:
5. Go to System Management on the left sidebar.
6. Click on the System Upgrade Tab
7. Click Upload the Upgrade, then browse and select the firmware file.
8. Click OK and follow the prompts.
Changing Lan Address and DHCP Options
It is possi